Search results for query: *

Really not concerned with either of those two things. The mold will wipe right off. Rear window isn't even that bad

ORIGINAL Service manual & in PDF. I also have a full parts book. I obtained these years ago but had to take a 15 year break away from these beasts as I changed career and built a business.

Yes, the leaf springs do need to be replaced!

Sure, the mold on the interior and the rot around the rear window likely not strong enough to hold the glass has nothing to do with it.

Fresh up on FlakeBook.... 1968 Dodge Coronet WK41 Police built Alabama Squad Car $10,000 in Las Vegas, NV All original unmolested 1968 Dodge Coronet WK41 police built Alabama squad car, still retains its original 383 HP engine and trans. I mean it still even has its original unsilenced HP...

75-76 a-c controls. May fit other years I'm not sure. Part # 3503305. Everything moves as it should but it's untested. $20 plus shipping from 40165. Thanks

1967 300

Hey all, I've got a 61 Dart Seneca with 225 and I'm trying to fix basically all the lights. I tried troubleshooting the brake lights malfunctioning and broke the male connector in the stop light switch on the master cylinder in the process. I am trying to figure out what kind of connectors they...

Join me in welcoming @Missourati to FCBO.

The Edelbrock carbs are a universal design and a small adapter is needed to mate the linkage on the car to the linkage on the carburetor. Look through the Summit link below. Edelbrock Throttle Lever Adapters - Mopar Throttle Cable End Type - Free Shipping on Orders Over $109 at Summit Racing

That B-25 used to be in Camarillo, CA. I can’t remember where it moved.

110, automatic Plan is to get it driving. It’ll never be a show car, but fun - yesirree!

any problems with the kit?

Ahhhh. Thanks!

This is mine. It's lit up a bit whiter because I'm using an LED bulb to keep the heat down and hopefully avoid cracking the new lens. This is the reproduction lens and ring that the 300 club sells. With a yellow incandescent bulb. They often cracked and this was my original that I made...

No need to split them, I boiled mine, greased the shaft, couple hits with a mallet, couple more hits with a deep socket and done. Alan

110 or 140? Looks like a good start. What's the plan?

I'm scanning the 1965MY Technical Service Bulletins and ran across this reference to 300Ls What does the radiator grill light assembly look like in the day and at night? Is this a large or small lamp? What does the replacement lens look like? Thanks.

If those are fr Moog, decent. Mevotech doesn't slice theirs, making it a trifle more difficult to install them. IDK who else slices theirs, or doesn't. The Mevotechs I put in my '68 are U.S.A. made, which was a pleasant surprise, though I've seen their rubber come from all over south Asia...