Search results for query: *

Welcome from Mississippi

When I first read the original post, it sounded to me like a fuel supply issue at WOT, after driving a while. It might be a new fuel pump, but if the fuel pump pushrod has worn and shortened, the result is a shorter stroke for the pump and less total fuel supply to the carburetor. A new push...

Hello all, I have a 69 Plymouth Fury 3 with a 73 318. I had the engine pulled out to resolve rear main seal leak and decided to replace the rod and main bearings while in there. After getting everything replaced and measured with plasiti gauge I removed everything one more time. Everything...

Hello, I am looking for an early 318 timing cover. Specifically, I am looking for one with the timing marks on the passenger side of the cover. I think that style is 1968 maybe, and for sure 1969 only. Thanks, Tim Northeast of Detroit

Looking at the '70 Service manual, those look like bolts you can remove. Download it and see page 23-64 for a diagram. You can get a copy at mymopar.

I have a full set of regulators. Message me if you’re interested. The parts book shows the numbers to be the same for All C-bodies including Imperials.

I like the black top if it was vinyl.

original from factory

Think its this one I listed up on an auction site, bought for $9.5k plus fees Looks nice cleaned up... https://collarcityauctions.com/servlet/Search.do?auctionId=985&itemId=126748#

Ok. Did that style change then in 71? My box cover is smooth. I've not had a 70 yet.

In the alert tab up on the top right corner next to the search bar. I received an alert (a number in red) that this thread had a post as well as a few other threads.

No AC Top needs to be repainted to match body color. That black looks Stoopid.

Yeah, you haven’t read the thread then. This is his mother’s truck, it’s her vehicle so it’s her obligation to put insurance on it herself.

On my 68 fury I used the old 15x7 cop car wheels 20 yrs ago when they were strong,cheap and readily available...4 1/4 inch backspace...don't know about your body style but mine's pretty low and I only have about an inch of clearance up front with the wheel turned between the tire and outer...

and plugs look great

NAPA 36756...73 fury...the drum brake hose points upward, i drilled another hole for the retaining tab on the hose bracket and rebent the metal line so the hose became more horizontal

edelbrock 650

little to no play

I understand that the son was not insured, but I apparently missed that mommy wasn’t insured as well. 9256. That is a lot of times!

I assume the seat worked prior to pulling the interior out. Are you getting any clicking like it is trying to move? Do you have a good ground? Try using the frame for a ground.