Search results for query: *

Hi all, Have any of you had a problem with your starter relay just quitting unexpectedl? Went to get into the 68 fury this morning for work and it wouldn’t start. I’ve been driving it for the last eight years with no problems. I looked at it after work with my son turning the key and the...

Hi all, Can i replace the 727 in the 71 fury with a 904 from a 72 coronet with a 318 without any problems? I just wondered if it would work till I got the 727 rebuilt. Thank you. Charlie

Hi all, Since nobody seems interested in the green fury, I’ll guess I’ll rebuild the tranny. Should I replace the torque converter while doing the transmission or reuse it. Thank you.

hi all. I discovered my rear axle seals are leaking bad on the right side of my 68 fury. I'm guessing I have to deal with the bearing adjustment when I take it apart?

Hi all, I been having problems with the tranny for 3 or 4 years now. It started when I was driving home from work. It felt like the warmer the tranny got the worse it slipped and the car wouldn’t drive. I got it home and adjusted the bands and it seemed to work better for awhile. For the...

i went to check the power steering fluid in the 68 and noticed the power steering belt was half turned over on the crankshaft pulley. I put the belt back on right but it turned almost by the time I made it home. How could it turn? I just replaced the belts in July with gates belts.

my 71 fury has an 8 1/4? In it and I want to swap an 8 3/4 from a 68 fury. The 71 has rubber isolaters on the springs that the 68 don't. What do I have to do to get the 8 3/4 in?