Search results for query: *

  1. C

    72 coronet disc brakes to 68 fury

    Hello all, my father passed away last month and he has a 72 dodge coronet that he bought from the original owner in 79. I know it probably wouldn’t work but could I use the disc brake from this car? Thank you . Charlie
  2. C

    Lower control arm shafts turning trying to take but off

    Hello everyone, I have to change the strut rod bushings on the 68 fury and in the process of loosen the control arm shaft nut I discovered that the shaft is turning also. Should I use a vise grip to keep the shaft from turning while getting the nut off? I’m guessing I should replace...
  3. C

    Master cylinder cap leaking

    hi guys, My 71 furys master cylinder cap I see leaking to the point where there is almost no fluid in the front compartment. I replaced the master cylinder about three years ago after one I put on failed after a couple of months in use. I've tried bending the bailing wire and filing...
  4. C

    Alignment shop says sleeves are too long...

    I just rebuilt the whole front end on my 68 fury with most parts bought from a-resto parts in Utah and a pitman arm and Gabriel shocks from autozone. The owner of the shop I took it to said that the tie rod sleeves are to long to set toe in right and bring the steering wheel to center. What am I...
Back
Top