Search results for query: *

  1. Ross Wooldridge

    WANTED 65/66 Chrysler AND 65/66 FURY pushbutton AC/Heat/Defrost vacuum switch wanted

    Hey All, Looking for NOS or good used for the pushbutton vacuum switch for a 1965 or 1966 Chrysler and also for 65/66 FURY. The part number is 2587 564 If you have one, but don't want to take it apart from the actual dash HVAC controller, I'll take the whole shebang. Why not buy one of...
  2. Ross Wooldridge

    WANTED 66 Power bench seat driver side lower trim wanted

    Hey all, Still looking for the driver side lower trim for a power bench seat. 1966 Chrysler. It's different from a manual bench seat in that Power seat has a hole for the switch stem, while manual seat doesn't. Anyone have? See the pics below - Power bench seat in burgundy 4 door town...
  3. Ross Wooldridge

    WANTED WTB - 1966 C body power bench lower aluminum cover molding

    Hey all, I am looking for the lower molding for the bottom of the seat that is specific to power bench seat. It's different than manual seat, and not the same as bucket seats either. Look at the picture below - I am not sure if they're the same for 65 and/or 67, but I know that they changed...
  4. Ross Wooldridge

    WANTED VACUUM TRUNK VAC HOSE CLIPS

    Hey all - looking for a pair of the clips for the vacuum trunk option in 65/66 C body cars that hold the vacuum hose to the trunk lid hinge, as well as the hose grommets as seen in the picture below.
  5. Ross Wooldridge

    WANTED 65/66 C body big block oil pan

    Hey all, Idly looking for an affordable undented big block C body oil pan - I think I need a #187... Not wanting to pay $300 for a repro with an extra quart capacity - stock original is OK by me. PM please and/or post here. Thanks!
  6. Ross Wooldridge

    WANTED 65-66 Autopilot parts needed

    Hey all - I'm helping a guy source parts for his restoration, and he needs Auto Pilot parts from a 65 or 66 Chrysler (or any 65-66 C body for that matter, it's just it's more likely to be found on a Chrysler). The parts are pretty much 65-66 specific. Wiring harness from dash to servo (goes to...
  7. Ross Wooldridge

    WANTED Mid 60s Mopar terminal block

    Anyone have a few insulated terminal blocks like these that they're willing to part with? Typically found on the firewall, the have a metal base that uses a hex head sheet metal screw to secure it to the firewall, and an insulated block with an encapsulated shouldered terminal bolt with a cap...
  8. Ross Wooldridge

    WANTED 66 dual snorkel air cleaner

    Anybody have a 66 dual snorkel (big block) air cleaner they'd be willing to sell? Cheap... :) Condition unimportant as long as it's not rusted through or severely pitted...
  9. Ross Wooldridge

    WANTED Hideaway headlights

    Looking for a pair of complete hideaway headlight systems (two car's worth) - condition unimportant, year make and model unimportant as long as they're the kind that completely turn over (I can't make use a pop-up system). Working or not, as long as the system is complete and can be repaired. 68...
  10. Ross Wooldridge

    WANTED 68 Seat Belts with shoulder belts

    Hi Y'all, I have been looking into doing shoulder belt setups on my 66 cars with factory parts from a 68 car. I drive my cars enough that with today's traffic density, using just a lap belt is asking for trouble in the case of an accident. Some time ago I had a few emails/conversations with...
  11. Ross Wooldridge

    WANTED 1965-1966 Leece Neville alt brkts w/AC & B/RB

    Hey all, Would anyone have in their stash, the correct alternator mounting brackets for a Leece Neville alternator setup, for a 65/66 B/RB motor with AC? Just doing a wild stab in the dark. My Monaco might have had a Leece Neville setup when new, but there's no way to tell. What I do know...
  12. Ross Wooldridge

    WANTED 1966 Chrysler TILT TELE COLUMN SHIFTER BOWL

    Hi All, The shifter bowl on my 66 Town and Country tilt tele steering column just disintegrated today. Pot metal, difficult if not impossible to repair. Anyone have? Has to be 66 - 65 and 67 and up are different. Dodge and Plymouth are different too...
  13. Ross Wooldridge

    WANTED 66 Sport Fury door panel

    Anyone have a decent driver's door panel for a 66 Sport Fury? Colour not important.
  14. Ross Wooldridge

    WANTED 4 speed back up switch CONNECTOR

    Hi all, Looking for a backup lamp connector housing for my 4 speed. This is a two prong plastic connector that pushes onto the two prongs coming out of the back up lamp switch on my 4 speed trans, connecting the backup lamp harness to the trans switch. This connector is unique to 4 speeds...
  15. Ross Wooldridge

    WANTED 4 speed console top

    Anyone have a 66 - 68 4 speed console top for sale?
  16. Ross Wooldridge

    WANTED B/C console shifter delete plate

    Hey y'all Looking for a B/C body console shifter delete plate. Anybody have?
  17. Ross Wooldridge

    WANTED '65-68 power vent switches

    Hi y'all, I am in need of a passenger side single power vent window switch, and likely should get a driver's side one to be prudent. Anybody got 'em?
  18. Ross Wooldridge

    WANTED 65-66 Twilight Sentinel setup

    Hey Y'all, Looking for a Twilight Sentinel setup as typically found on 65 - 66 Chrysler vehicles... Photocell (driver's side dash) Amplifier (found near pass side kick panel) Switch Bezel and Knob (located below headlight switch) Associated harness Anyone?
  19. Ross Wooldridge

    WANTED ON LINE HUB CAP SOURCE

    Hi y'all, I have lost the link to my hubcap source - I need to get links to good wheel cover places that have comprehensive listings by year make model - I figure if anyone knows it's the gurus here at FCBO!! Any ideas? Thanks in advance!
  20. Ross Wooldridge

    WANTED BRAD'S NOS PARTS

    Hey Y'all, I've been trying for WEEKS to get ahold of Brad's NOS parts - no one answers the phone, no one returns messages, NOTHING. Anyone know what's going on there?
Back
Top