Search results for query: *

Since I've been gone I finished the PS upgrade. Works Great with a little floating Issue , probably a caster camber thing. On the maiden voyage , I let the car idle for about 20 min to watch temp as I was having heating problems. After 20 min it was heading for 200 D . I took it out and by the...

I bought a pulley from someone . He thought it was 5/8 x 5". I got it and discovered that it slips over my 5/8 " steering pump shaft (federal). I measured and it looked like 5/8 but when I put the calipers on it , it was actually 11/16. I've never heard of a mopar shaft of 11/16. can I sleeve...

I'm assuming A body and Cbody power steering are the same. Anyone know the size of the input shaft to steering coupler. Zigs

Got my steering pump today . I was surprised . it actually looks pretty good. All the stories about Cordone products and of course they had to dip it in a five gallon bucket of 10W30 before they sent it. I measured the shaft and it is 5/8" and I believe the correct pulley is 4 3/4" So what I'm...

I'm looking at aP/S pulley a guy has. It shows to be 5/8 shaft hole and 7" diameter. My pumps is for a 68 dart 383 Federal pump press on . He's not sure what year pulley. Does anyone know the correct pulley for the 62- 68 Federal BB pump?

Is the power steering line anything special can a fuel line be used its not under pressure. I have a section of fuel line. Most pictures show it being held on with hose clamps.

1968 Dart 2DRHT 400/471 stroker 727 489 sure grip . Also a matched set