Search results for query: *

I have read several different comments/articles with different conclusions. Will a bumper from a 65 Fury I - III fit a 65 Sport Fury?

Top and Interior going in, align, exhaust system and DONE! FINALLY!

Installing the convertible top on my 1965 Sport Fury and the Top Weatherstrip Retainers are nowhere to be found. Prior shop, as with many other things, lost these in their junkyard while they hold themselves out to be a restoration shop. The top is done except for the installation of the...

As part of my restoration project, I want/hope to use my stock AM Radio with blue tooth. Based upon what research I could do, it appeared the best option was to use an RediRad AM Adapter which would allow me to plug into my my i-phone. At this point it gets a little fuzzy but I assume that my...

Are you sure Hank did it that way? The center console after installing the new carpet, first picture, was showing wear, tear and abuse from 34 years of use so repainting seemed like a good idea and still does. HOWEVER, console is chrome, black stripes and argent paint. This then required three...

Car is coming together and we are down to the finer details. I am installing the original AM radio back in my 65 SF. Prior to the restoration, I had a digital radio, CD changer and amp in trunk. I am not putting this back and will worry about a sound system later. The original radio has a...

This is a part from a 65 SF. Steering Column?

The Glass Window Run on a 1965 SF used Felt glued to the Metal Channel vs. a rubber insert. As part of my restoration project, I need to replace the Felt but am not sure what type of glue to use. It should be tacky, hold the Felt in place, weather well and cure to a flexible adhesive. My...

Nightmare continues! Still trying to reassemble my 1965 Sport Fury which I was forced to move from one restoration shop to another story of which I have commented herein before. Never found all the parts and never will and it has been frustrating, at best, to find replacement parts. I am...

Getting the trim ready for my 1965 SF which I am restoring. I posted pictures of the side trim which I did with Engine Turning and now it is time to do the rear panel and I am not sure how to complete it. The panel consists or 5 sections with the Middle containing the name "PLYMOUTH" which...

Looking for a rear bumper gasket for 65 Plymouth SF. If I could locate only the material to make my own, even better. Gasket needs to be 72 or 75 inch (trim). They are available for B body but fighting the old C body issue again. It would also be helpful if someone could provide a picture of...

Had all the trim on my 65 SF polished that I am restoring! When I had the trim polished, I lost the Engine Turning, looked high and low, found it in vinyl and ordered. I was real skeptical about how to install it and how it would look! Looks great and not that difficult to put on. Just hope...

I purchased a Grant Wooden Steering Wheel which is "walnut." I assumed it was going to be "Black Walnut" but when it arrived it appears to be "English Walnut" which I questioned, (I managed a Black Walnut Sawmill for 30 years, like the Lexus wooden steering wheel - ours). I questioned if it...

Everyday presents a new problem! Again, putting my 65 Sport Fury convertible back together and working on the rear quarter windows. In the backside of the window, attached to the body is a rubber weatherstrip, gasket that is shot on both sides; pieces broke off and missing. It appears to be...

Restoration continues with progress. Time to install rear panel. I need to paint inside of PLYMOUth letters with black paint. Used self etching primer and then with Semi-Gloss block enamel as a test. Peeled off like sixteen year old out of the back door of a 3.2 bar when the police walked in...

Roll me over, I'm done: Purchased a complete under the dash wiring harness for a 66 from Classic Industries for the restoration project of my 65 Sports Fury; I was assured the one from a 66 was the same and I am sure it is and it would work. We just are now installing (6 months after...

Looking for and need a steering wheel for a 1965 Sport Fury. Mine is totally a piece of .......... and needs to be replaced. I realize that more than likely there is not a pristine one somewhere out there but one that is in decent shape and repairable would be a giant leap forward. Also, is...

In the process of painting 1965 Sport Fury, complete restoration. I obtained a A/C dash, red, which we need to paint light blue. The question by the painter was what the finish should be; flat, satin, or gloss. The, painter and the person doing the restoration, are pro gloss. It has been...

I have been trying to contact Detroit Muscle Technologies for several weeks; multiple e-mails and multiple phone calls with messages left. They have been very responsive and helpful in the past with very quick shipping on several purchases. In fact, they have been one of the best vendors to...

Debating on what size gauges to put in my 65 Sport Fury. I have purchased the Auto Meter Sport Comp II, 2 1/16 LED See Through the Dial Lighting but after arrival I am concerned about the size. The Auto Meter Cobalt 2 5/8 also has LED Through the Dial Lighting. They both have black faces so...