Search results for query: *

Don’t know the proper name for this piece, but here’s some pictures of what I need. It’s the part where the grill mounts onto and where the latch is. I believe I would also need the latch with the connecting rod too? I have Fenders, Hood, Grill + Extensions as well as the bumper too to do this...

Anyone located in or near Southern California have left and right fenders to a 1968 Chrysler 300? Planning on turning the shell of my 68 New Yorker into a 300, and have basically everything I’d need except for the fenders. Would appreciate any help!

1968 Chry NY. Heater box build currently in progress. I badly need a new H valve linkage. It’s the linkage that goes from the H valve to the door. Mine is completely rusted / broke off and disintegrated. Trying to get the New Yorker driving by September and the heater box is holding me up...

Hello, trying to get the ball rolling again so I can finally finish this 68 Chrysler and get it on the road. My next line of action is to get that dashboard back inside, but to do that - I need to re-install the heater box. Have some parts coming my way to finish that off, but I realized I...

Hi all, looking for a nice set of these I plan on semi-daily driving the NY once it’s on the road. I know it will be a pain to keep the Cragars absolutely spotless and clean so these wheel covers will be nice for a beautiful clean / stock look and I can save the shiny wheels for car shows and...

ISO disc brake proportioning valve from any C Body. Looking to use it on another project (62 300 disc brake conversion.) Trying to avoid the type with the rear zone retarder. I’m thinking any 70s unit for front disc rear drum. This is all that’s available, but like I said - for my...

Might anyone have a boot for a pitman arm w/ power steering? Goes to a 68 New Yorker. Mine is toast.

I am in the process of setting up my 440 to drop back in the New Yorker. For now, I will not be running AC. In fact, I don’t ever plan on going back to factory AC. In the future, I would like to run a new Sanden unit. This is pretty expensive and for the sake of my $$$ and also for the sake of...

Hey all! My distributor for the New Yorker is pretty tore up. The wire that comes out of it is all chewed up and mangled from the mice and it's really rough looking. I'm trying to see if anyone may have a rebuilt one for sale? Pulled out my box of 440 parts today to begin the process of engine...

Hello all, looking for some more parts! Looking for sun visors (black) for a 68 New Yorker as well as an interior rear view mirror in nice condition. I appreciate any help!

Hello all, I know it’s a long shot - but would anyone happen to have the vacuum lines that go from the back of the AC / Heater control switch that actuates the doors to the AC/Heater box under the dash? Also looking for the fresh air vent cables that control the kick panel vents. I appreciate...

ISO: Blower motor and fan (squirrel cage / hamster wheel) for a 1968 Chrysler w/ Heat and AC non auto temp. Are there new replacements that work? Also, a long shot but trying to see if anyone has the vacuum control lines for the HVAC control switch. I believe there should be 7 for my setup. I...

Welcome to another episode of trying to get this car on the road... I've decided to take some more time and fine tune the last things I need done for the 68 to finally hit the road. We are getting there, a little at a time - but ever so closer. I got lucky, and scored 2 1966 Chrysler 300 bucket...

Looking into my 1972 C-Body disc brake setup that I will be installing on my 68 New Yorker, it appears that I’m missing the pin positioners. If anyone has them for sale I’d love to buy the set for both LH and RH calipers!!

If any of you have the door flapper rods, and the linkage for a 66-70 B & C Body AC / Heater box PLEASE let me know, as I am in need of those parts… The linkage here is rusted BAD, and one of the door flapper rods snapped clean with no effort when trying to remove a nut. The box itself is a...

My 1968 2 door hard top Chrysler New Yorker is going to need headliner bows… Car came without any or a headliner so I don’t even know what I need for the complete “setup.” If you have bows and any other hardware for them I may need I am interested in purchasing them! Thanks

Hello all, I’ve acquired a nice set of 300 tail lights! I need the correct wiring harness for them. Please let me know if you have one. Thanks!

Hello all, as you know I’ve been gathering parts for the interior of my 1968 project. I am in search of 1968 Chrysler 300 door panels, for a 2 door hard top! Must be black in color … doesn’t matter if it’s power windows or not! You may be thinking, “Isn’t he fixing up a New Yorker?” - Yes, I am...

Hello all, if any of you have a CLEAN and complete set (LH & RH) of 1968 Chrysler 300 tail lights, please let me know! I am also looking for the 1968 Chrysler 300 tail light wiring harness. Thanks for any help…

Looking for a disc brake pedal that fits my 68. The one that says DISC BRAKE on it ! Im not sure if that’s exactly what it says but I’d like the correct pedal for a disc brake car:) Appreciate any help!