For Sale 1965 sport fury console car- whole or parting out

C Body Mopars For Sale

Thread Status:
Not open for further replies.
  1. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    Contact Seller
    I have most of this car and several good pieces left- complete dash, rear glass, complete console with shifter (carpet is not on it), decent no rust hood, decent no rust decklid (no rust but needs a little straightening along the latch edge), complete suspension and subframe (V8 drum brake car) a seized but very complete poly 318 with 727 cable shift automatic, steering column, side glass is out of car. The rear axle is an open 3.23 8.75 and is complete as well. Car has no title but I got it in a trade and am using pieces for my 65 SF restoration.

    I will be harvesting the lower quarter and trunk pieces out of it and most of the trim, but I do have spares. Front floors are rotten but rears are primo.

    I have access to the seats (very decent shape- at my buddies house) and doors but car was hit on the drivers side so the fender on that side is gone, and I need the passenger fender. some things I might be able to mail out, but the majority will need to be sorted out on how to get to you. Ask me what you want and I will price it. I will try to get some photos up soon and if there is any interest.
     
    • Like Like x 2
  2. rapidtrans

    rapidtrans Senior Member FCBO Gold Member

    Rating - 100%
    2   0   0

    Messages:
    4,236
    Likes Received:
    2489
    Joined:
    Jun 8, 2016
    Location:
    MI
    Tach in console?
     
  3. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    no sorry, regular clear lens. but I believe it is in great shape. The cover plate is a little pitted too- nice driver quality.
     
  4. 65sporty

    65sporty Old Man with a Hat

    0   0   0

    Messages:
    8,481
    Likes Received:
    2077
    Joined:
    Aug 24, 2013
    Location:
    Kingston, Mi
    Rear bumper?
     
  5. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    Yes I do have that- still on the car too. I will get some pics. Its in decent shape if I recall and straight but let me check first.
     
    • Thanks! Thanks! x 1
  6. tdenkler

    tdenkler Active Member

    0   0   0

    Messages:
    285
    Likes Received:
    51
    Joined:
    Nov 19, 2010
    Location:
    greeneville tn
  7. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    Yes i do, and while it is great on the inside, it has a dent and all that blobby undercoating on the outside. Since I had two tanks i just took the better of the two. It may be missing that one little 1/4" nipple vent too- all completely serviceable issues by a competent radiator/tank shop for a reasonable fee. However, it holds gas just fine too, and it is currently empty so i can see it inside with a light. My buddy has it down at his yard, so tomorrow or the next day he will bring it up and i can get some pictures of it, inside and out. I will email pics and we can go from there- stay tuned.
     
  8. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    Yes i do-
    very straight and solid (i didn't see hardly any old lady dings or twists), but it is a candidate for re-chrome, as it has a large flake of chrome missing from behind the license plate exposing it to surface rust. It is more of a driver unit in my opinion, but it is still on the car and ready to be harvested, along with brackets etc if you need them. It is a desert car out of Oklahoma somewhere so the sheet metal is really nice (except for the floors). too dark tonight to take a pic but i will see if i can get you some in the AM.
     
    • Thanks! Thanks! x 1
  9. 65Fury440

    65Fury440 Senior Member

    0   0   0

    Messages:
    2,521
    Likes Received:
    1049
    Joined:
    Apr 21, 2013
    Location:
    West Central FL
    PM sent
     
  10. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    I just sent you an email- let me know if you got the pics ok.
    Thanks!
     
  11. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    Sorry for the delay- here are some pics, let me know if you are interested.

    20170429_140451.jpg

    20170429_140456.jpg

    20170429_140502.jpg

    20170429_140517.jpg
     
  12. Jakenks

    Jakenks Member

    0   0   0

    Messages:
    161
    Likes Received:
    63
    Joined:
    Nov 20, 2016
    Location:
    Wichita KS
    rear floor pan same as a 65 Chrysler 300?
     
  13. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    Should be. How much of it do you need? Both sides? I can get pics if you are interested.
     
  14. Jakenks

    Jakenks Member

    0   0   0

    Messages:
    161
    Likes Received:
    63
    Joined:
    Nov 20, 2016
    Location:
    Wichita KS
    I need the right side passenger back seat footwell. Mostly around where the plastic plug is. Can get pics later. Yes, I'd like to see pics also.
     
  15. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    As you can see the passenger rear side is very solid. A little bumped up in the middle but will flatten once cut out. Drivers side not so much. Tell me where to cut and how much you want to spend and we can go from there.
    20170506_193601.jpg 20170506_193617.jpg

    20170506_193610.jpg
     
  16. Jakenks

    Jakenks Member

    0   0   0

    Messages:
    161
    Likes Received:
    63
    Joined:
    Nov 20, 2016
    Location:
    Wichita KS
    looks nice, sorry no computer this weekend. I will measure how much I need.
     
  17. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    Ok. Sounds good. I will mark it and take pics before i do cut it. Let me know when you know.
    Thanks!
     
  18. Jakenks

    Jakenks Member

    0   0   0

    Messages:
    161
    Likes Received:
    63
    Joined:
    Nov 20, 2016
    Location:
    Wichita KS
    the area outlined in red needthis.jpg
     
  19. Valiantmope1

    Valiantmope1 Member

    Rating - 100%
    1   0   0

    Messages:
    59
    Likes Received:
    6
    Joined:
    Apr 21, 2017
    Location:
    Albuquerque
    How much up the sides vertically do you want?
     
  20. Jakenks

    Jakenks Member

    0   0   0

    Messages:
    161
    Likes Received:
    63
    Joined:
    Nov 20, 2016
    Location:
    Wichita KS
    enough for some ability to trim to fit. two-three inches?
     
Thread Status:
Not open for further replies.