SOLD 1967 Imperial convertible project.

Status
Not open for further replies.

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
Contact seller
For reasons beyond my control :lol:this one needs to find a new home sooner than later.
See it here in great detail.
My new ‘67 Imperial convertible
I would be willing to sell the rolling chassis without any parts at all except what is required to keep it rolling and steering as seen in the following pics in this post. If you don’t see it attached to the car in the following pics it is not included. I did however put a better drivers door on it as the original was not worth saving and I had a spare and a pair of skirts. Obviously the rear bumper and bumperettes are included too.
The rear axle seems to function as it should and for this entry level price I will also include its original standard bore disassembled short block, a pair of 915 heads, driveshaft and a core 727 from a ‘67 Imp.. I will also throw in a radiator w/shroud and a full underhood ac system and HVAC box. Oh and also another top frame that’s better than the one that’s in it and the top motor is working but needs at least one new line.
I haven’t had any of wheels off of this car so as far as I know all of the brake parts in the 4 corners are still where they should be and the tires actually have 0 miles on them but I don’t know how old they are, possibly less than 6 years though.
The body and frame are very solid thus I’d rather not part it completely at this moment but of course I will if I can’t find a buyer as I’m offering it in this thread. The passenger side quarter has had some collision damage repaired in the past but is solid like the rest of the car appears to be.
There is no title or fender tag as of now so just bill of sale at this price. I could go about titling it for the extra cost involved.
Entry level price as explained in the body of this post after the link to the thread in the Imperial forum is $3,500.00.
B0438A61-76B0-443D-953C-DA63737A6208.jpeg
68E99BD8-958A-41BE-84DE-35034121B668.jpeg
8703D31A-292D-41AB-83A6-D44B2DA69C5B.jpeg
341864B3-6AE4-4DC7-B541-7A3B2FBE81CC.jpeg
64908489-0062-46AB-8B1E-F6B798148188.jpeg
4741D595-2E25-4F7B-A668-FE577330CB1F.jpeg
6E8B41FB-0E92-43F7-BEA0-38C752C52288.jpeg
A0607BA7-DD69-4FF2-BFED-3CEA58D46C73.jpeg
8C393219-111D-4207-8EE3-E4CC21284FCD.jpeg
CE0D72E8-A5B5-4A2A-A3CF-F91A72A4112E.jpeg
 
Last edited:

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
The package above would be good for someone that might have a complete car with a rotten body and I would even sell for less if you didn’t want the drivetrain parts except what’s needed to keep it a roller. All is up for discussion.
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
Now for the other end of the spectrum.
Since it was a basket case when I got it and I happen to have a lot of what it was missing I’ve put together an almost complete package as follows.
Everything in the first post plus all the glass & regulators, interior & exterior trim, front bumper, grille, cornering lights, tail lights, dash assembly w/radio, wiring harnesses front to back, front & rear seats, all door & interior panels, working power window motors including vents, working power door lock solenoids, working power seat bases, 2 power antennas that will make 1 working unit, all switches for everything, mirrors, sun visors, door handles and latches, set of emblems, hood ornament etc.. basically a complete car to the best of my ability. I don’t have every single thing but most of it. This is still a big project that won’t be cheap but one that I think should be worth doing and for the complete package I’m asking $5,500.00.
Here are some pics of how it’s looking right now and I will add or can provide pics of all the parts that are included but not yet pictured here.
A36F98F3-1C47-40A1-936D-FC8D4F350138.jpeg
F7B92A90-5600-474D-89CA-8C47E0B4AA8F.jpeg
195690B8-C806-47FC-89F4-BD617C9918F3.jpeg
EB986D53-6DD3-4AB8-80C8-734CE456901C.jpeg
4EF2821B-77F1-41CE-8FDD-ED6149C5D333.jpeg
3B296777-BB9F-4536-8868-B19007EC8FD6.jpeg
4E952E7C-1B88-494A-B070-0A5E3AF81BF4.jpeg
E9FE7937-1126-4E39-B523-14F2C49520A6.jpeg
42F36E96-EFC7-4AEC-9525-7946B7970FA6.jpeg
340871CD-442D-48BD-B0FF-6B8B65DC6CBF.jpeg
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
I will answer any questions and am also willing to customize a package somewhere in between the 2 above.
I also have some parts that are better than what’s included so upgrades are possible.
Here’s more pics of full package parts.
BB1061A6-57B3-4C7F-962E-25DF9075D799.jpeg
89AEB4E9-98E9-4DEC-9C0E-9BD228DA9F9C.jpeg
CFA5ADD3-5E17-480E-BBF7-0BE7916ABFA5.jpeg
8217A8F6-C392-4522-8DD8-D3D906470AD8.jpeg
D3C2AA37-6978-43DB-BB4D-FD6863B96C28.jpeg
CCFC3195-90CE-499C-BF88-9D813EC47D56.jpeg
F665F6A2-7B79-4F8F-A64B-397EBACFF523.jpeg
0318E976-A117-4028-BF86-91FBA487032F.jpeg
13EF7517-8872-4188-B0DE-5BDD83A6823D.jpeg
2E9FC8B4-825D-4FFD-81C8-233AE935E121.jpeg
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
By the way I am 100% sure that I could part out all of the above for considerably more than I’m asking for the packages especially the complete one. I know this based on a lot of the same parts I’ve sold over the last couple of years.
 

Mr C

Senior Member
Feedback: 0 / 0 / 0
Joined
Nov 20, 2012
Messages
4,336
Reaction score
4,154
Location
All over
Thanks for what you've done to save it and bring it back to project status.

Good luck with the sale.
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
Thanks for what you've done to save it and bring it back to project status.

Good luck with the sale.
Now I just hope someone “grabs the baton”.:thankyou:
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
More pics of parts to come.
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
Seats are in and the power bases and their controls are working although they could use a clean and re-greasing for smoother operation.
72CFBCEB-8D5A-4C68-8C11-58B1ED571C17.jpeg
0046F196-B611-405F-BA92-9FA467CB3F78.jpeg
FAFB008E-BC8C-4BE8-8A43-A0791E4D9723.jpeg
584F1F85-3D4A-4745-85C7-9C3EA49CA1A7.jpeg
F3A2D405-D4EF-44CA-AF5E-73FB59E409AC.jpeg
41F311DD-E384-4E2D-8C72-E26782E6B48F.jpeg
80F23041-8A2B-40DB-8417-4A038E99A353.jpeg
92969FE6-C9A7-474B-BF9C-584DAFD94E36.jpeg
B691F04C-B831-488E-89EB-E1DBC3BBBCAD.jpeg
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
Also included are the windshield with gasket and a glass rear window.
A90CABA4-ED8E-49A3-B569-68B2EFE8D2E7.jpeg
67C1A3E3-6F06-4ACC-9C7B-0DF60FC30B21.jpeg
E206BC04-2600-4D3F-B069-C13DC9865715.jpeg
28E50F64-7C27-4ECB-AB5E-D8D0CA262ECA.jpeg
51DC3920-8F7F-44D2-A5E4-27B2DBB98E93.jpeg
4550221C-7E08-43BC-B8E9-955CF120F0BB.jpeg
DD83A61F-5A55-4711-BAB8-A4E9EC4A3A32.jpeg
3CB6CE5E-B8A3-43DD-BA94-99D8F43DE6DF.jpeg
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
Seat trim, power base cover plastic set and assembly hardware that was all cleaned in a parts vibrator.
11899C75-47E8-469D-A020-1781223906D9.jpeg
464E2DD1-DAC0-4396-BEF1-A3EEB0C502C2.jpeg
AC87AD99-57F7-4C98-9DB9-032766C95FFB.jpeg
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
All the parts and a second standard bore 440 short block goes with it for $5,500.
 

Mr C

Senior Member
Feedback: 0 / 0 / 0
Joined
Nov 20, 2012
Messages
4,336
Reaction score
4,154
Location
All over
One of only 577 Imperial convertibles made in 67...in case anyone was wondering just how rare these things are.
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
Just took the first step to get a title for this one. Had a police officer here to fill out the vin inspection form.:)
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
Got the vin inspection, appraisal and just ordered the surety bond so I should have everything I need to apply for the title with the dmv soon.
 

detmatt

Old Man with a Hat
FCBO Gold Member
Feedback: 26 / 0 / 0
Joined
Nov 14, 2010
Messages
26,901
Reaction score
24,063
I bet y’all were wondering about the engine room.:thumbsup:
The engine/trans that’s currently in it is from another ‘67 Imp and doesn’t appear to have ever been apart and spins freely.
Everything in the following pics is included.
542557CF-D69A-4C71-8FC0-FB93188F4EF8.jpeg
8E470AE6-4AAD-4DE0-832A-3B7A4F2AE922.jpeg
F5C7715F-B502-481A-A6A2-2CB1BD954B54.jpeg
5BD7E314-F3F8-4240-B3CD-4E6A3C1314D3.jpeg
FCAADE20-7901-4718-890F-4C6C7385C127.jpeg
E9D8DA4D-6FDE-48FD-8A7E-0D9736A152C1.jpeg
6E6BD073-276E-427F-B4BA-4AC5483DA55A.jpeg
 
Status
Not open for further replies.
Top