SOLD 1970-71 Chrysler 300 Fenders Hood Deck Lid and Valance

Status
Not open for further replies.

Samplingman

Old Man with a Hat
Joined
Apr 18, 2012
Messages
6,136
Reaction score
7,017
Location
South Jersey
Feedback: 5 / 0 / 0
Contact seller
I'd really like to clear these parts out, I would hate for them to just go to scrap. Fenders are from a ‘71 300, they still have the BSM pins, hood deck lid and valance are ‘70. The ‘70 hood is different from the ‘71 in that it does not have the holes for the Chrysler letters along the front edge. Valance is solid, just needs to be straightened. Located in South Jersey, local pickup only, I cannot ship these, but would be willing to drive them a reasonable distance for a fee. I was asking $250 for the lot. Scrap price is about $75, so make an offer and I'll let it go, or if you are only interested in one or two parts, let's make a deal.

87329950-B08F-49C6-9C32-FDE99AA4EE37.jpeg

D8F0B1A2-5778-4247-9330-9D74B8E363DD.jpeg


A8A6C9F1-A3DF-401D-BECC-E3CDEA4EF119.jpeg

E4DC382A-CCAE-4D21-B0B2-DD676F3732C7.jpeg

ADAA6638-A5C0-493E-8C2C-C2DBD01FF7BA.jpeg
3C333A1F-E565-456F-8DF9-5AFE4FD07E74.jpeg


E579DF32-02AF-413A-A915-C321AF7CB73B.jpeg



F7F99929-0CAE-46CA-B667-AF537A23A90E.jpeg

20D060CF-F013-41C2-A6B6-135AE040D54B.jpeg
 
FYI, 70 and 71 fenders are the same, even have the same part number.
 
FYI, 70 and 71 fenders are the same, even have the same part number.
Right, and I was going to use these, but they have the pins for the body side clips. I was thinking that most of the '71's that I have seen have those moldings, but not '70.
 
Status
Not open for further replies.
Back
Top