413 engine

Randy Stoner

Member
Joined
Oct 4, 2020
Messages
76
Reaction score
23
Location
Mishawaka, Indiana
Was wondering if there is much demand for 413"s out there. Looking at a block with 516 heads. I would guess a 4.320 bore would get standard 440 pistons. Thanks for any information.
 
IMO very little demand. If the crank is standard there's some value as its same as 440 as long as it's not the industrial 8 bolt
A few people use them for max wedge clones
They can be bored to 426 wedge
 
Back
Top