65 chrysler 300 dash an pad dissassembly????

cbodygearslammer75

New Member
Joined
Jan 31, 2012
Messages
19
Reaction score
0
Location
greeneville tn
:smilie_help: Anyone know how to take the dash pad an dash off a 65 chrysler 300, without breaking the dash or the pad i cant find a referance??:BangHead:
 
Remove the nuts (can't remember how many) on the underside of the dash where it meets the cowl. Although not necessary, it makes it a lot easier if you pull all the dash and A pillar trim pieces. Push up on the studs from underneath and start pulling from the driver's seat. The foam may have melted on the metal dash frame so it may take some persuading. It also helps if you have another set of hands to assist.
 
Thanks so much for the info to remove dash.
Also, much thanks for you and Stan and Commando1 for posting/monitoring/and responding on this site.
This is the only body site I surf now cause you guys do all the searching that I used to do on C bodies!
Thanks!

Tom Denkler
 
Have you noticed that you have never seen Stan and Commando1 in the same room together?
 
Dr. Jekyll and Mr.Hyde ? :)
 
Last edited:
facepalm.gif
 
Back
Top