So I need to rebuild my power steering pump but reading the forums and looking online for rebuild kits seem to confuse things more since different terminology is used. Based on the descriptive picture comparing the federal vs the trw pump it looks like mine is the trw. My question is the one on my 66 sport fury currently is the 5.1" reservoir(see 1st two pics) but I also have one taken off another 66 fury I parted out that is the 4.6" reservoir(2nd two pics). I have all the brackets for the smaller reservoir and would like to rebuild that one then swap it out. When looking online for rebuild kits everything seems to reference option 1 "slotted or hex end shaft" or option 2 "plain end shaft". Anyone know what rebuild kit and shaft seal I would need for the trw small style pump I have and also what high pressure hose for my factory steering gear box?
I don't want to do any power steering upgrades at this time since I have the expense of a 4 wheel disc brake system I just bought and still need to get wheels/tires to accommodate plus redoing the interior seat upholstery in a couple weeks. Just want to fix the excessive leak that just started.
I don't want to do any power steering upgrades at this time since I have the expense of a 4 wheel disc brake system I just bought and still need to get wheels/tires to accommodate plus redoing the interior seat upholstery in a couple weeks. Just want to fix the excessive leak that just started.