'67 Fury convertible door window??

[John Reddie]

My '67 Fury III convertible driver's door window needs the small slide pieces that actually secure the glass into the frame and the plastic weatherstrip piece that fits in the track. I have attached a diagram of the pieces in question. Any info on availability will be really appreciated.

 

[Ripinator]

The only source I can think of is Murray Park. I actually need the little pin (Part No. 20) myself.

 

[John Reddie]

Thanks for your response. I have dealt with Murray before-a nice man. He probably would want to sell the glass as well but I will contact him. If that is the case then I may do just that before my window gets really loose. I have found no places that offer these pieces NOS.
John R

 

[MYSINBIN]

Ask and you shall receive:

WANTED - Door Glass Vent Window Channel Seal KIT | For C Bodies Only Classic Mopar Forum

Hope the input helps.

John

 

[John Reddie]

Thanks for the info. The pieces pictured here in the first photo are the pieces that I need. The second photo shows two pieces that my friend sent to me but they will not work. The weatherstrip is different and the plastic slide pieces which actually hold the glass in the track are much too small. I didn't see any pieces in the sites posted that looked like the ones for my car. I appreciate all replies here.
John R

 

[67-Fury]

I had to reuse mine when I took the glass out of the door to get the regulator in. Brittle as all hell.

 

[rumpfox]

My '67 Fury III convertible driver's door window needs the small slide pieces that actually secure the glass into the frame and the plastic weatherstrip piece that fits in the track. I have attached a diagram of the pieces in question. Any info on availability will be really appreciated.

View attachment 139162

View attachment 139163

you can order them from mopar for $60. just take that pic with you and they can pull it up on there fish. they had the same pieces for my 66 sport fury and you could just buy one side instead of both sides like everyone else sells for $120. part num. is2932230 for my fury. had it in 3 days no shipping

 

[John Reddie]

Hey rumpfox, thank you for this info. Did you go to a Mopar dealer and they were able to find these pieces for you? Is your Sport Fury a convertible?
John R

 

[pomonamissel]

years ago i bought those slider assemblies from chrysler still have some nos in their factory packaging .

 

[pomonamissel]

just looked at mine , there like the second pic you posted .

 

[Big_John]

you can order them from mopar for $60. just take that pic with you and they can pull it up on there fish. they had the same pieces for my 66 sport fury and you could just buy one side instead of both sides like everyone else sells for $120. part num. is2932230 for my fury. had it in 3 days no shipping

That number will give you more of these: