WANTED 67 Polara/Monaco wheel opening molding.

[bluefury361]

1967 Dodge Polara right front wheel opening molding. The section over the top of the opening and forward to the bumper.

 

[HWYCRZR]

Will,
The P/N’s and shape are different between’67 & 68.
‘68 Polara is a 1 piece that that goes from the front to the bottom of the rear. also Because of the differences in the lower trim between the Monaco’s and Polara’s they were exclusive to the DL, DM. ‘68 p/n 2932196-7
Yours may be exclusive to ‘67.

Here is my ‘68. DL and fits DM

 

[HWYCRZR]

The trim you need for the 67 Polara 500 vert is compatible with '67 DM (Polara 500 2d & convert) all and DH (Monaco except wagon) Monaco 500 is like the wagon trim so won't work.
DL does not have trim on the fender (as per the parts book)
If you want a '68 parts book to compare or check some of the 67 part numbers against '68 the Mymopar site has free '68 electronic Parts manual.

'67 PN

 

[bluefury361]

Thanks for this information. It's going to be a little tougher to find one now...LOL. I'll revise my wanted ad.