'68 300 and a '66 Plymouth VIP

[[email protected]]

Have the center console option in the '68 and finally have access to some pedal's, etc., out of a '66 Plymouth VIP -everything I'm told short of the tranny itself- to drop a a-833 into her.
Compatible?
My 300 is a 440 TNT/727 now. Always wanted a C-body clutch.
Thanks to all for the guidance.

 

[bigmoparjeff]

The bracket is likely different between '66 and '68, as they changed the dash design quite a bit between those years. It's possible that you could mix and match parts between the two and make something work with a bit of fabrication. Most C-Body clutch pedal assemblies are for manual brake cars, so if you have/want power brakes, you will need to address that too, unless you were lucky enough to find a super-rare power brake pedal set-up.

Jeff

 

[traintech55]

Ask Commando 1, (Stan), He is the expert on putting 4 speeds into "C" bodies.