73 Fury 3 heating and cooling parts

Binky1945

Member
Joined
Aug 4, 2016
Messages
106
Reaction score
21
Location
Richmond, Ky 40475
Hello again, Does anyone have a mopar parts number for the cork gasket that embeds in the flat side of the heater core support frame? It is about 20" long by 10" wide and about 3/16" thick. I see images of it in the Mopar chassis blue book but I cannot find a parts number. Also looking for the original film tape seals that stick onto the a/c/ evaporator mount's flat side. Considering using stick foam insulation tape but would rather find some original parts. Old cork gasket is still in good shape after all these years but is flattened out with age. Thank you again as usual, Jim Dent
 
Back
Top