`73 Town & Country 440 ; Dual exhaust fitment ?

v8brit

New Member
Joined
Sep 9, 2020
Messages
13
Reaction score
37
Location
Brighton, UK
Hi !
I have 1 of only 3 , `73 Town & Country 440`s here in the UK.
The original front section has rusted through at the "Y" junction ( Generic stock photo enclosed ) ; Im hoping to go to dual 2.5" exhausts .
My question is ;
As the stock drivers side head/front pipe crosses under the sump , joing with the passenger side , into the single exhaust, I will need new,separate , head/front pipe`s that aim in the usual direction, towards the rear of the car...Photo of my drivers side manifold enclosed..
Im guessing `73 New Yorkers and from other C bodies will fit ? And then make dual pipes for the rest , similar to the last photo enclosed.
As we do not have exhaust shops in the UK, only " Classic car specialists"......Its a VERY expensive business to have an exhaust made...( Quoted $1,000 for a basic dual, exiting in front of the rear axle, with ME supplying the mufflers......)...
Many thanks for any advice given, especially on a supplier that might be able to ship to the UK using Ebay global shipping or similar......

Y PIPE..png


20210316_133644.jpg


20210318_150158.jpg
 
@Tobias74 just put a TTI dual exh on his 73 T&C......
here in canada or at least where i am a dual exh can cost $2500 for a shop to make it.
so a TTI kit might be your best option.
i can appreciate the difficulties getting US car parts in the UK my parents are from Lancashire originally
 
5425FFA9-285B-45CE-8C57-71533BC3EE05.jpeg
Yes TTI systems work good if you you on a budget.
I think I paid only $1400 including shipping to Can
 
Thanks for the replies .Basically...
Im HOPING to get away with ordering just the manifold/down pipes, similar to the photo enclosed , from the USA, and make up duel pipes from that . Magnaflow dont list any C body`s as far as I can see ?
Any help is much appreciated...

MANIFOLD PIPES.png
 
Back
Top