Best way to pull dash pad from 66 fury

[66vip]

I found a recently wrecked 66 fury with the interior in really good condition. I'm grabbing several parts this week including the perfect dash pad. Looking at my dash (I bought my VIP with no pad on the dash) I just see the 10 bolt holes (excluding the speaker grill) that look next to impossible to get to without pulling the dash. Does anyone know the trick to getting this off without pulling the dash, or do I have to pull it?

thanks

 

[commando1]

Those aren't bolt holes. Those are holes where clips pop in. You remove the dash like you would pop off a door panel.

 

[Fratzog]

Those aren't bolt holes. Those are holes where clips pop in. You remove the dash like you would pop off a door panel.

I don't know about 66. 68 and 70 definitely bolt on. 1/4" drive with long extensions required.

 

[commando1]

Definitely clips on the '65 (when it was an option) and the '66 (when it was standard).

 

[66vip]

Thanks much for the info. That's great news and in theory sounds like an easy removal. I'm heading over there tomorrow to carefully pull it along with some other parts. I'll post an update when completed.

 

[commando1]

Pull the glove compartment box first to check to see if it's a clip or a nut. Just to make sure..... And bring both tools.

Posted via Topify on Android

 

[bluefury361]

I wish the 69's were clipped on.......

 

[66vip]

Thanks again.. They were clips as mentioned.. Took my time removing and now I have a perfect dash pad.8

 

[Fratzog]

Thanks again.. They were clips as mentioned.. Took my time removing and now I have a perfect dash pad.8

Written descriptions don't cut it on this board LOL. Pics please.

 

[66vip]

So sorry.. Here it is... As good as it was from 66..