Sep 24, 2020 #1 ratrod69 New Member Joined Jan 7, 2019 Messages 7 Reaction score 0 Location Perris, California I have a 1960 Plymouth Fury with no brake switch bracket and switch. Where can I find this.
Sep 24, 2020 #2 4 413 Senior Member Joined Jan 28, 2019 Messages 1,866 Reaction score 2,166 Location NW USA You can’t because it Never had one. They used a switch screwed into the bottom front of the master cylinder. you can get a switch and bracket from another car and put it inside on the pedal. Then extend the wires inside the car.
You can’t because it Never had one. They used a switch screwed into the bottom front of the master cylinder. you can get a switch and bracket from another car and put it inside on the pedal. Then extend the wires inside the car.
Sep 24, 2020 #3 D Davea Lux Old Man with a Hat FCBO Gold Member Joined Mar 27, 2017 Messages 9,221 Reaction score 8,571 Location Cornelius Or The factory brake light switch is still readily available, it is a simple two pole switch that was used on most cars until the early 60's. Dave
The factory brake light switch is still readily available, it is a simple two pole switch that was used on most cars until the early 60's. Dave