WANTED Dash Parts- Hardware needed

Status
Not open for further replies.

DaPoz

New Member
Joined
Dec 23, 2019
Messages
32
Reaction score
1
Location
Naperville, Illinois
Feedback: 1 / 0 / 0
Contact seller
I am in need of a gland nut and thick washer for either the push button shifter control housing assembly or the blanking plate on the console 300's. I see four are used an all push button Chrysler and Imperials prior to 1964. The picture shows a grommet still on the nut.

I also need the four Phillips head 10/24 machine screws that mount the instrument hood to the bottom of the dash top over the instruments. Not necessarily with the thread cut. These are a different head size than hardware store screws.

Please help, I need these to put my 64 300 K back together!

gland nut.jpg


20210804_150242_resized.jpg


hood screw.jpg
 
I could be wrong, but that screw looks a lot like the ones used to hold my 68 dash together. They may be more widely used than you think. The grommet I cannot tell anything from the picture.
 
Here is a more clear shot of the gland nut. They seem common prior to 1964. At least to '62.
The head diameter of the screw is .31". Hardware store screws are .37".

20210812_115441_resized.jpg
 
Status
Not open for further replies.
Back
Top