Front End Rebuild Kit - 1966 300 WITH Factory Disc Brakes

[ShortCRKT]

Hey guys!

Silly question...

After looking at all the available front end/suspension rebuild kits out there and searching the threads here, I have noticed that all of them note their kits do not fit 65-68 cars with factory disc brakes.

Does anyone happen to know where a kit that will fit 65-68 cars that do have factory disc brakes?

Thank you in advance and I apologize if this has been answered and I happened to not see it!

 

[thethee]

I've had no personal experience, but I've read good things about Craig @mobileparts so I'm guessing he'll have what you need. Hopefully he will chime in here.

 

[MetalManiacAZ]

X2 on Craig with Mobileparts. The lower ball joints may be your only problem as they are not produced by any aftermarket vendor.

 

[ShortCRKT]

Thank you guys for the replies. After doing some research, I have decided to swap to 69-72 spindles and brakes. This will allow the use of 66 drum brake lower ball joints.
Thank you again for the insight!