WANTED Front Fender Trim - RH Passenger - 1968 Chrysler 300

Status
Not open for further replies.

Skihat

New Member
Joined
Sep 19, 2021
Messages
15
Reaction score
3
Location
New Hampshire
Feedback: 0 / 0 / 0
Contact seller
Looking for a good Right passenger front fender trim for a 1968 Chrysler 300. This is on the fender/body at the grille opening. Previous owner actually broke mine.

As you can see on my opposite side shown, after polish... the tarnish and finish condition (especially at the top) is driver quality. That is fine!

Arrow pic is not the actual vehicle

3333.jpg


image0 (6).jpeg
 
I have a drivers quality fender extension trim, I will visit my storage stash, and get some photos for you this weekend.
 
Here are the fender trim pieces that I have available. The chrome is still bright, there is some small occlusions at the top of the right hand /passenger side trim -however they have not progressed to pitting. There are no cracks or gouges-and all mounting pins are intact. I would like $80 per side or $140 for the pair. I would be willing to meet off of Rte 16 between North Conway - or Rochester -whatever is town is easier for you.
 
Status
Not open for further replies.
Back
Top