Need 65 2 dr hard top quarter window parts

[Catfish]

Guys, I have been looking for a pair of these for 5 years. Looked high and low. Asked everywhere. Even scoured the derby forums where I did eventually buy a pair, but they are really bad too. These are part of the rear quarter window assembly. Very fragile. I have not found a place the re-pops these. Any ideas? If anyone can get me a set of these in usable condition, I will make it worth their while. Please guys, if you have a parts car with these in it let me know what you need for them and for your time to remove them.

 

[commando1]

I read a looooooooong time ago about guys substituting this:


http://www.moparmetal.com/showitem.aspx?&id=101747&name=67-72 1/4 Window Roller Assembly

Haven't a clue if it's suitable enough.


RE: Mopar window roller parts; If Jim's doesn't list it, it's not out there.
I would try mixing and matching parts. I bet it can be done.

http://www.jimsautoparts.com/glass_and_ window_parts.htm

 

[68plymouth383]

I have some in my parts cars. I will look and let you know. Jason

Guys, I have been looking for a pair of these for 5 years. Looked high and low. Asked everywhere. Even scoured the derby forums where I did eventually buy a pair, but they are really bad too. These are part of the rear quarter window assembly. Very fragile. I have not found a place the re-pops these. Any ideas? If anyone can get me a set of these in usable condition, I will make it worth their while. Please guys, if you have a parts car with these in it let me know what you need for them and for your time to remove them.

 

[Catfish]

I have some in my parts cars. I will look and let you know. Jason

You sir, will be my hero! Thanks Jason. Let me know what you find and what you need for them. Don't forget to add some cost for your time in painstakingly removing the little bastards.

 

[Catfish]

I read a looooooooong time ago about guys substituting this:


http://www.moparmetal.com/showitem.aspx?&id=101747&name=67-72%201%2F4%20Window%20Roller%20Assembly

Haven't a clue if it's suitable enough.


RE: Mopar window roller parts; If Jim's doesn't list it, it's not out there.
I would try mixing and matching parts. I bet it can be done.

http://www.jimsautoparts.com/glass_and_ window_parts.htm

I see A, B, and E body stuff.......Man, why the hell did I build a C-body? Parts are so much easier for those ther guys".

 

[commando1]

Dave: Is that a square roller?

I see A, B, and E body stuff.......Man, why the hell did I build a C-body? Parts are so much easier for those ther guys".

Like I said, mix 'n match?
I've gone to HD and scavenged parts off of closet door hardware...
You do what'cha gotta do.

I'd use two rollers from the hardware store mounted on a small nut, bolt, and washers.

 

[Fury65]

Guys, I have been looking for a pair of these for 5 years. Looked high and low. Asked everywhere. Even scoured the derby forums where I did eventually buy a pair, but they are really bad too. These are part of the rear quarter window assembly. Very fragile. I have not found a place the re-pops these. Any ideas? If anyone can get me a set of these in usable condition, I will make it worth their while. Please guys, if you have a parts car with these in it let me know what you need for them and for your time to remove them.

I have a '66 Sport that we are completely parting out so, if they are part of the rear quarter window regulator.....I'll have them. I will look into it.

Even if I don't have them (which would be easier), worst case scenario, I don't see any reason these couldn't easily be milled from UHMW..........be better than new!!

 

[Fury65]

Well, here they are......


I sent you a PM

 

[commando1]

Well, here they are......

s_dancing2:

 

[Catfish]

Sent you a PM, those damn nice for their age! Best set I have seen yet. Let me know on the PM.

Edit, I just now noticed you are in Canada. I can add some more funds to my quote for the higher shipping charges. Thanks!

 

[Catfish]

Thanks Fury65! Can't wait to get these, I don't even have the car back from the shop yet....but finding a set this nice has been a challenge for me.

 

[northbay65]

just parted out a 65 i will look to see if hey are still in good shape.

 

[65Fury440]

I need one of these dealies as well. Northbay if you got em I'm interested.

 

[northbay65]

still looking

 

[Marian]

Just now getting to the windows and wouldn't ya know....I need one of these too. Also, if anyone can tell me where to find a window stop rivet, I'd really appreciate it.

 

[northbay65]

Mine where broken also sorry how about drilling a# shape around the ball and fill with epoxy? Just a thought