Neutral Safety Switch Wiring

Pana.Mopar

Member
Joined
Mar 25, 2012
Messages
58
Reaction score
5
Location
Sydney, Australia
Hi Guys, need some advice on my 68 Polara. It's got a 318 from a '70 Phoenix in it which has a 3 pin neutral safety switch and the car was originally a single pin switch. I can't find a single pin switch anywhere so what should I do to connect the 3 pin switch?
 
The center pin is for the neutral switch. The two outside pins are for the reverse lights.

If you have the harness, just use the center wire. If you don't, you can probably solder a wire to the center pin.
 
Thanks so much for your assistance Gents. Much appreciated!

I'll sort this out and then onto the power windows which are an issue.
 
Just FYI, all worked out a treat with this. Got it sorted over the weekend. Now just power window issues and all good to go.
 
Back
Top