New Bumper Bolts?

[JPMODL]

I just rechromed the rear bumper for my 70 Sport Furt GT, does anyone know of a source to buy new bumper bolts?

 

[Pete Kaczmarski]

Check with you local favorite body shop. If they don't have them, they know where to get them from.

 

[71Polara383]

@sixpkrt should have a source.

 

[HWYCRZR]

Most local body shops have the round head Chevy ones, not the flatter stainless covered /capped ones. The closest I found for my’68 was from Mr.G’s Fasteners, Ft. Worth, TX.
Not quite as flat as the original, but very close. Also has the bumper thickness flats.

 

[Trace 300 Hurst]

RT Specialties has most everything...

1000023 BUMPER BOLT KIT 70-74 E-BODY, BODY, 1000023 :Mopar Fasteners, Clips & Hardware

1000021 BUMPER BOLT KIT 66-70 B-BODY, BODY, 1000021 :Mopar Fasteners, Clips & Hardware

 

[HWYCRZR]

I am not up to speed on the ‘70, but if I recall the R-T Specialties bolts for the other bodies were 5/16” whereas my ‘ 68 Polara used all 3/8” diameter bolts.

 

[cbarge]

I got my bumper bolts from National Moparts in Beaverton Ontario.
They are the stainless ones with no caps.
But to each their own.
Once the bumpers were installed, The car as a whole was looked at more than dwelling on the bolts.

 

[Toolmanmike]

Sorry @JPMODL for the disruption.