Power steering pump HP fittings

Toastno6

New Member
Joined
May 11, 2021
Messages
45
Reaction score
110
Location
Mass
Hi everyone! I’ve got an old seized TRW pump that I’m replacing with a 69-73 Federal pump that I have lying around. The TRW high pressure port has an inverted flare fitting in the pump body whereas the Federal appears to have something else. Can anyone tell me what kind of fitting or adapter I may need for the Federal? Thanks!


1461EADE-64F4-43F7-A894-CF85E516358C.jpeg
932DE11C-A250-4363-8D4C-ABCD75B31649.jpeg
D41AD660-5EB4-4727-A341-90FC89ABB6F9.jpeg
AE841E26-804C-489C-BBC0-2FCC0B95FFE0.jpeg
0C6C98F3-8864-41FE-BE51-A28D2715C939.jpeg
 

Toastno6

New Member
Joined
May 11, 2021
Messages
45
Reaction score
110
Location
Mass
Well I couldn’t find a hose with the correct fittings on both ends, couldn’t find an adapter, local hose place couldn’t make me one. What to do? Well, the TRW has the brass fitting in it and I have an angle grinder……. Ten minutes later, power steering!

CF89621F-25FA-4485-BF9A-701058996CA7.jpeg
6ACDE54C-948B-4323-9436-D631454A2B13.jpeg
10D9CFFB-B0E7-428F-BC00-421A2DE263D3.jpeg

94A84B72-97B7-4A97-B831-C54E969C7C9A.jpeg
 
Top