crazyboutwagons
Well-Known Member
trying to get the power locks working in my 68 plymouth wagon.
1)i checked the voltage to the controler on pass side kickplate and was within spec according to the service manual.
2) i checked the circuit breaker on drivers side and it is getting power
any suggestion what to do next? i was going to check the accuators in each door next to see if the were getting power. all locks operate manully except the drivers side rear door i was going to start there.
i replaced the controller on pass kickpanel with a NOS one i bought and there was no change so i took it out and put the old one back in so not to short it out.
1)i checked the voltage to the controler on pass side kickplate and was within spec according to the service manual.
2) i checked the circuit breaker on drivers side and it is getting power
any suggestion what to do next? i was going to check the accuators in each door next to see if the were getting power. all locks operate manully except the drivers side rear door i was going to start there.
i replaced the controller on pass kickpanel with a NOS one i bought and there was no change so i took it out and put the old one back in so not to short it out.