Had a torque converter built a few years ago for my stroker build. When ordering he wanted to know the year of the car ,weight ,rear ratio, ci displacement, wanted to see the cam card and probably a few other things I have forgotten. Went to put in the 11" [or 10. something to be more specific] converter and it would not fit as I guess the spline count was different. If I remember correctly are the torque converters for 727's a bit different in the spline count for 1965 and back compared to 1966 and up? Just to confirm I posted the number stamped on my 727 so that someone can confirm it's production year. I am assuming the last 2 digits mean 1969 but don't know for sure. Really a pity as time is short and we are just going with the stock converter installed till I can resolve this.
Any thoughts to enlighten me would be greatly appreciated. I would like to be armed with some knowledge on this before I speak with the builder of the torque converter. I am not angry as poop happens but want to resolve this logically. Thanks much.
Any thoughts to enlighten me would be greatly appreciated. I would like to be armed with some knowledge on this before I speak with the builder of the torque converter. I am not angry as poop happens but want to resolve this logically. Thanks much.