WANTED Wanted leaf springs

[Fury Rookie]

For 68 Plymouth fury. New preferred if anyone has any idea wher to get them. I need drivers side as it has main leaf broken. But would like to replace both. Car is 68 Fury 2 door hardtop originally 318 car now a 360 Need all install parts also . Any help is greatly appreciated. Thanx Frank

 

[Davea Lux]

For 68 Plymouth fury. New preferred if anyone has any idea wher to get them. I need drivers side as it has main leaf broken. But would like to replace both. Car is 68 Fury 2 door hardtop originally 318 car now a 360 Need all install parts also . Any help is greatly appreciated. Thanx Frank

www.stengelbros.com
www.eatondetroitspring.com

There are many suppliers of replacement leaf springs. You will need to know the number of leaves in the spring pack and the leaf width.
You can also google '68 fury replacement leaf springs and many other suppliers come up.

Dave

 

[C Body Bob]

I have used in stock just Incase the new aren’t available

 

[HWYCRZR]

Some have used Espo with good experience.
Buy Quality Automotive Leaf Springs, Coil Springs and Suspension Parts for your Classic or Antique Auto

 

[Big_John]

Go with ESPO. Probably closest to you too for best deal for shipping. Lot's of us have used them with very good results.

Buy Quality Automotive Leaf Springs, Coil Springs and Suspension Parts for your Classic or Antique Auto

 

[Love Shack]

ESPO did an excellent job on new springs for our '70 Newport Convertible. exact fit, excellent price. I would also highly recommend them !!

 

[Fury Rookie]

Wow thanks everyone Danville is about 55 miles

 

[bluefury361]

Replace both. Makes no sense otherwise. Not likely you would find one new spring for sale.

McVeigh's Truck Springs | eBay Stores

 

[Fury Rookie]

I have used in stock just Incase the new aren’t available

Hi c body Bob
You are saying you have used leaf springs for 68 Fury 22 x37 5 leaf 2.5 inches wide Can I get a price and do I need the bushings also

 

[1966newport]

espo

 

[Fury Rookie]

Nobody has in stock and I can’t do 6 to 10 weeks lead time

 

[C Body Bob]

Hi c body Bob
You are saying you have used leaf springs for 68 Fury 22 x37 5 leaf 2.5 inches wide Can I get a price and do I need the bushings also

Well I haven’t measured them but I parted two 68 Fury’s & this is what I pull out from under them. I’ve sold one side so I have a complete pair & and one side. $50 for the complete pair plus shipping. Yes you will need bushing. Check with member mobile parts if you can’t find local. I had a feeling they wouldn’t be available. Covid had hurt the parts suppliers. I have had to cancel orders. Just tried to get a radiator a couple days & they can’t give an estimated ship date.

 

[Fury Rookie]

Well I haven’t measured them but I parted two 68 Fury’s & this is what I pull out from under them. I’ve sold one side so I have a complete pair & and one side. $50 for the complete pair plus shipping. Yes you will need bushing. Check with member mobile parts if you can’t find local. I had a feeling they wouldn’t be available. Covid had hurt the parts suppliers. I have had to cancel orders. Just tried to get a radiator a couple days & they can’t give an estimated ship date.

 

[Fury Rookie]

Can you get the measurements please I want the pair of them Left and right As soon as I get measurements I will get you the money. I will order installation parts also

 

[C Body Bob]

Can you get the measurements please I want the pair of them Left and right As soon as I get measurements I will get you the money. I will order installation parts also

Certainly, I can do that tomorrow. Now these are 50 year old springs. You should have them rearched. Unless you are just trying to get the car on the road again

 

[Fury Rookie]

Certainly, I can do that tomorrow. Now these are 50 year old springs. You should have them rearched. Unless you are just trying to get the car on the road again

Hi Bob.
I don’t know how to pm on here My email if [email protected] Send any info I need to pay you and all will get done

 

[twostick]

John R Spring in Troy Michigan used to keep those springs in stock. Been a while since I spoke to them but they were decent to talk to and good pricing.

John R. Spring Service, Inc. | Spring Manufacturer

Kevin

 

[C Body Bob]

Hi Bob.
I don’t know how to pm on here My email if [email protected] Send any info I need to pay you and all will get done

About to head out there now & I’ll get measurements & a video for ya

 

[C Body Bob]

Hi Bob.
I don’t know how to pm on here My email if [email protected] Send any info I need to pay you and all will get done

Video sent. Let me know if that’s what you want to do & we can work out shipping. I weighed one at 35 pounds just spring

 

[Fury Rookie]

Where did u send vid