Search results for query: *

Hey all, Haven’t been on in a while. Just wondering.. like.. what the biggest wheel I can put on my pressure washer is? Also: Selling this hose.. how much you think it’s worth? It “needs restored”. Seriously though, hope you all are well. Bev went to a show a few weeks back. Only C Body in...

After a good 8 years of regretting trading in my 2014 Ram 2500 on a Scat Pack, I put some scratch down on this today: A 2018, 2500, diesel 6 sp manual. Just under 20k on the clock. While I’m not super excited to be in the more door truck world, I couldn’t be more happy to be back in ma mopar’s...

Alright, I'm going to be OOZING ignorance in this post as it is on my weakest topic: electronics. I've got an old Economy Country Squire tractor that I've been picking away at since 2012 and I'm finally gettining down to putting the electrical system into it. It's a 6v system with a geared...

Hi all, I’m a tad confused here. The “Monaco” lettering on the trunk lid of a 67 Monaco, clearly the lower pins on the letters are held in by a strange variant of a speed nut with (what was) like a rubber protection sleeve over the protruding excess of the pin. Three of mine were busted off and...

I’m pretty sure these would be consistent across all 67-68 C Bodies but for the sake of specificity, I need kick panels for a 1967 Dodge Monaco 500. Color isn’t important as they’ll likely get the same treatment as the lower dash anyways. I’d like them to be complete, not cracked, not had...

I’ve got a question for the folks in here who have removed this: keep in mind, this is made more complicated by the fact that at some point, some super smart individual decided to chase a leak down with one metric sh** ton of clear silicon... by that I mean, under the lower trim of the rear...

Hello, I'm looking for the trim that goes around the rear window of a Fast Top car or at least, the lower corners. Many, like mine, we're hit hard by condensation and leaky window seals so it's improbable that I'll find a perfect example. I'm just looking for something that's structurally...

Hey all, I tore down my console today.. the majority of it is in fine condition and will be pretty much ready to reassemble after a deep clean and some touch up. One issue I found was That the top plate insert (in my case like a deeply etched aluminum) is pretty badly scratched up in the area...

Hey! Does anyone in CT own a 69 Polara, Gold w/ black vinyl? I was working on my yard yesterday and a rather pretty looking on rolled by my house in Tolland. If so, NICE CAR. Made my day!

This'll likely be a shout into the void as I'd assume that as no one owns any, no one has removed any ... There doesn't seem to be anything in the FSM about removing the lower brightwork from my 67 Monaco 500 and I'm wondering if anyone has any experience with it. I haven't jumped on it yet and...

Bev is going into a new realm here. I blew my heater core which lead to an overheat ... I'm not totally sure what that may have done mechanically but it's sort of moot at this point as the engine has needed a rebuild since I've owned it. The couple of gallons of coolant on the carpet however...

I realize that this is unlikely as if the car is gone enough to part, this part probably ain't worth parting. However, I just want to get it out there while I'm still tearing down. The lower window channel in my 67 Monaco 500 2dr fast top is toast. I'm certain that the part made up by the...

I'm wondering (first off) if anyone could explain the components that join together to form the bottom of the rear window channel in a 67 Monaco/Polara 2dr HT. From what I can tell, the dutchman's panel sandwiches with a piece (what the inner window trim anchors too) that goes vertically down...

Hey all, I'm looking for someone to rebuild my heater core as I've not been able to find a replacement for an A/C car. I'd like to keep this local but could make it just about anywhere in New England, NY State or NJ. Anyone have a trusted person for this sort of thing?

Hi all, I know these were used in a bunch of different models of Mopar auto console cars so I thought I'd throw it up'ere first. I'm looking for an automatic console shift release knob for my 67 Dodge Monaco.... not a huge deal but as I'm driving her more, the little bits of chrome slicing my...

It has unfortunately come time to bid adieu to Beverly. A few things have come up on top of my house (seasonal maintenance, projects), my company (wood worker), my job (marketing), my dogs (three), my wife and my bad habit of making music, the car is getting little more than shelter in my hands...

For those whom haven’t figured this out, my very first love in the C Body world is the 67/68 Monaco’s and Polaras. That being said, the related accessory haul this holiday season was overwhelming and appreciated. Only thing is, I was looking in the mirror while wearing my Monaco hoodie and...

If I could just be an over opinionated jerk for a sec; in what dimension is this much lumber required to build a WINE RACK, does that dimension exist in my cellar and just how much stronger is the gravitational pull there? My whole basement (which is to be my shop) was filled with these. This...

Damn, I miss this trim. 1968 dodge Monaco 1968 dodge Monaco - $3000 (King george) 1968 monaco cylinders: 8 cylinders drive: rwd fuel: gas paint color: black title status: clean transmission: automatic 1968 dodge Monaco, 383 4 barrel. Hooker headers , 3 inch exhaust ...

She's pretty fine looking: https://www.hemmings.com/classifieds/cars-for-sale/dodge/monaco/2159398.html 1974 Dodge Monaco Brougham 2-door Hardtop Location: Danbury, Connecticut, 06810 Mileage: 35,000 Transmission: Auto Condition: Good Exterior: Blue Interior: Black...