GJS
Senior Member
Contact seller
I realize that this is unlikely as if the car is gone enough to part, this part probably ain't worth parting. However, I just want to get it out there while I'm still tearing down.
The lower window channel in my 67 Monaco 500 2dr fast top is toast. I'm certain that the part made up by the dutchmans panel is 75% gone. The lower part of the pinch welded material seems there but I won't know till I have the window completely out... in some places, this rot on the panel has spread at farthest about 3/16" out from the edge of the window trim.
Anyway, knowing full well that this will likely wind up being a custom fabricated deal, I just want to get this out there in case a more decent example comes along. I believe the same panel was used on 67 Dodge Monaco, Polara ... potentially (and correct me if I'm wrong) Chrysler Newp, 300 and NYer. Not that this would make it easier to come by ...
If anyone has any leads, let me know. Haven't tried Murray or anyone yet. Still have to get the window out to really assess the crap storm a brewin'.
Thanks
The lower window channel in my 67 Monaco 500 2dr fast top is toast. I'm certain that the part made up by the dutchmans panel is 75% gone. The lower part of the pinch welded material seems there but I won't know till I have the window completely out... in some places, this rot on the panel has spread at farthest about 3/16" out from the edge of the window trim.
Anyway, knowing full well that this will likely wind up being a custom fabricated deal, I just want to get this out there in case a more decent example comes along. I believe the same panel was used on 67 Dodge Monaco, Polara ... potentially (and correct me if I'm wrong) Chrysler Newp, 300 and NYer. Not that this would make it easier to come by ...
If anyone has any leads, let me know. Haven't tried Murray or anyone yet. Still have to get the window out to really assess the crap storm a brewin'.
Thanks
Last edited: