For Sale 1969 Chrysler 300 sedan parting out

[Wollfen]

I'm parting this car and have already taken a few parts out of it, the buckets are gone as well as the motor, trans and radiator. The rear axle assembly is there, front brakes are spoken for, grille is gone. Steering column will most probably be put up for sale with the center console and floor shifter. Rear bumpier is a nice core or daily driver, the taillights are good too. Sill molds are very nice. Let me know what you would like.

 

[Davews]

How is Trunk pan?

 

[Wollfen]

How is Trunk pan?

I will take pics tomorrow of it.

 

[dmac01]

horns work? also hidden headlight motor? and how about dash wiring harness?

 

[Wollfen]

How is Trunk pan?

I don't think its great, lots of scale and some small holes.

 

[Wollfen]

horns work? also hidden headlight motor? and how about dash wiring harness?

Motor is frozen solid, no horns sorry, but the wiring harness is almost perfect. No melt spots and everything looks good. On the passenger side of the harness there is a triple wire that has been cut, it was like that when i got it and i think it ran through the firewall on that side? Wouldn't be hard to fix. Check the pics amd PM me if interested.

 

[dmac01]

thanks for the pics...is the ignition switch connector solid? I could not 100% tell...if so, how much do you want for the harness and how should i pay? paypal, check?

thanks,
Dave

 

[Wollfen]

Pics of rear window

 

[Zymurgy]

How is the driver's side surround between the bumper and the grill? It is the last piece of the puzzle I need.

It looks intact from the pictures, I know they can be fragile. I would even be interested it was damaged, so long as all the pieces were there.

 

[Davews]

I don't think its great, lots of scale and some small holes.

View attachment 170880

Yeah, thanks for the pic, but it's too rough for me but thank you for taking the time...

 

[Wollfen]

thanks for the pics...is the ignition switch connector solid? I could not 100% tell...if so, how much do you want for the harness and how should i pay? paypal, check?

thanks,
Dave

I'm 99% sure it is fine but I will double check tomorrow and let you know. I would like $75 plus shipping for it and yes Paypal is fine.

 

[Wollfen]

How is the driver's side surround between the bumper and the grill? It is the last piece of the puzzle I need.

It looks intact from the pictures, I know they can be fragile. I would even be interested it was damaged, so long as all the pieces were there.

I think the one in my Convertible needs replacing but i will check and let you know.

 

[Wollfen]

Yeah, thanks for the pic, but it's too rough for me but thank you for taking the time...

No probs, maybe the next car!

 

[Wollfen]

thanks for the pics...is the ignition switch connector solid? I could not 100% tell...if so, how much do you want for the harness and how should i pay? paypal, check?

thanks,
Dave

Here are the pics for you, it looks perfect.

 

[Wollfen]

How is the driver's side surround between the bumper and the grill? It is the last piece of the puzzle I need.

It looks intact from the pictures, I know they can be fragile. I would even be interested it was damaged, so long as all the pieces were there.

Sorry Mate but the piece in question while good I will need as I checked my convertible and it needs it.

 

[Zymurgy]

Sorry Mate but the piece in question while good I will need as I checked my convertible and it needs it.

No problem, found out one of the other members had what I needed. All is good.

 

[david hill]

I'm parting this car and have already taken a few parts out of it, the buckets are gone as well as the motor, trans and radiator. The rear axle assembly is there, front brakes are spoken for, grille is gone. Steering column will most probably be put up for sale with the center console and floor shifter. Rear bumpier is a nice core or daily driver, the taillights are good too. Sill molds are very nice. Let me know what you would like.

View attachment 170750 View attachment 170751 View attachment 170752 View attachment 170753

Does it have power or crank windows. Courtesy light above ignition switch. B pillar pinch weld covers

 

[Wollfen]

Does it have power or crank windows. Courtesy light above ignition switch. B pillar pinch weld covers

It has crank windows , no courtesy light that i am aware but will check the dash frame now that it is out. The pinch weld covers, center pillar covers? They are rotten, powdery and falling apart.

 

[david hill]

It has crank windows , no courtesy light that i am aware but will check the dash frame now that it is out. The pinch weld covers, center pillar covers? They are rotten, powdery and falling apart.

Clips in the bezel in front of the ignition lock

 

[dmac01]

would you take $75 shipped for the wiring harness? And ship it cheapest way possible...