70bigblockdodge's latest activity
-
70bigblockdodge replied to the thread Rod Cap Reinstall Alignment.As Big John mentioned they should be stamped. Both the cap and the rod on the tang side, or facing the pan the oil sqirter v notch faces... -
-
70bigblockdodge reacted to Turboomni's post in the thread Voyager 1 and 2 still alive!!!! 38,000 mph! with .https://www.space.com/voyager-1-communications-update-april-2024
-
70bigblockdodge reacted to amazinblue82's post in the thread Voyager 1 and 2 still alive!!!! 38,000 mph! with .How the space kids celebrate :)
-
70bigblockdodge replied to the thread 8 3/4 Axle replacement pinion Seal.The correct way with a crush sleeve spacer is. Remove wheels, remove drums. Measure the turning torque of the pinion nut with inch pound...
-
I actually saw some of those Bortz GM cars when they were still in trailers at this yard. 15 y/o me hardly had the means to do anything...
-
70bigblockdodge replied to the thread EDELBROCK AVS2.As long as manifold is a late model it can be left alone. Only reason I don't like coming off the ballast side is, it draws a lot more...
-
70bigblockdodge replied to the thread EDELBROCK AVS2.I believe you have a lean burn car? There is a choke heater wire on the intake/passenger side connects to original divorced choke well...
-
70bigblockdodge reacted to detmatt's post in the thread Can you help a Small block Chevy guy understand a 1962 Chrysler 413 with cross-ram manifold? - compression and pump gas? with .:lol:
-
70bigblockdodge replied to the thread Finally, a Welder in the Family!.Mine is out of school and working. Spending all he gets on to old cars and guns. At least they hold value. It's nice not having to weld...
-
And there's no way those 516's are only needing to be cut for the 1.74's. I own a set of stealths and I chose to have Dwayne correct the...
-
Wonder if he's done similar things before, either doesn't have a clue or he's simply an arsehole, as many who drive those big rigs are...
-
I saw your post this morning. Very sickening, upsetting to see happen. To happen to such a good condition Imperial, uugghh.
-
Thanks for your input. The two cylinders show scoring on the thrust / intake side. I will be pulling those pistons looking for ring...
-
70bigblockdodge replied to the thread 1966 383 516 heads what pistons?.Well from my experience. No matter what heads you take to a machinist they are going to say they need work. I say this because I would...
