Recent content by awillard95

I have but unfortunately haven’t gotten any word back from them. Thank you though.

Needing a package tray for my 65 sport. Molded around split bench type.

Does anyone know where I can get a transmission park cable for a 65 sport fury console car? My end has broken off and attempt repair has left the cable too short to engage the park paw.

Where I don’t drive the car much I didn’t do the fuel gauge. But could replace either of the 3 with one.

Thanks for the reply’s. The motor is a 75 external engine I was able to take the converter from the rv and cut the weights off and weld them on the 65 converter I had.

Took a factory gauge cluster that was cracked and missing the lens and turned it into a modern trio 1.5” gauge holder. Removed the back of the casing with a cut off wheel and used 20ga to make the insert. It is held on to the front face by mechanics wire bent at a 90 on top and small holes...

I am swapping a 440 into a 65 SF that was originally 383. Planing on using factory cable transmission. Does anyone have a link or part number to a converter that will fit the 65 727. Thank you.

Bought a 65 fury 3 for a parts car and has a real nice set of tan/brown seats that I’m not gonna use. Free to anyone who needs them(you must pull) $100 if I pull. Located in stokes county NC zip 27046

Thank you and that is my plan. I’m going to replace all rubber and steel lines along with the fillers and all components. Tank looked bad enough to make me want to get rid of all the old.

I am very happy to have the car! He loved it and normally only drone 2wd 6cyl trucks and what else he could find cheap. He actually made a trailer hitch for this car when he got it. All he seen was a big block and a opportunity haha

I have done the brakes and have ordered a new gas tank due to original being little to far past reusing unfortunately. I have a rebuild kit for the gear box and pump hopefully can get done here in a couple weeks

I’m located in stokes county NC and thank you I hope to be able to drive it some before summer is over. Having a hard time getting parts. I waited 2 months for the wheels to come in and used Craig at mobile parts for all my brake parts so far.

Plan to just make it a driver so I can enjoy it then work on making it nicer over time.

I have a 65 Plymouth sport fury 383 car. My grandpa bought it in the mid 70s with no reverse for $100. He dropped the pan changed fluid&filter and drove it till my mom got out of high school in 89. She hasn’t been on the road since and me and my grandpa was gonna start working on it when I...