Recent content by BamaFury

I just bought a donor 64 Newport that has a complete 3 speed setup. I bought it to put into my 61 Newport. BOTH car’s 361s are garbage. So, I have a 1968 383 that runs excellent. It just overheats after a short drive. Pressure and antifreeze boils out of top of radiator. I changed water pump...

Sorry. Yes. I meant Rock Auto not Harbor Freight! @aaron72 is spot on. My bolts were bottoming out. So I used a couple washers and she spins fine. The Carter WP coupled with the aluminum rad is doing great so far! Another question for you guys: What’s the closest fuel tank that I can replace...

Yes. I paid $1500 for it with a locked motor and 3 speed on the floor. So- I’m not buying top shelf stuff for a four door beater. I did successfully get the motor unstuck, established spark, and she fired right up. I’ve replaced the brake master, fuel pump, oil change with zinc additive, and now...

I’ve installed a few water pumps in my life. I did it today on my 1963 Newport. Buttoned everything back up minus the belt and noticed I could barely rotate the water pump by way of the fan. It’s almost like the impeller is rubbing and hitting the inside the block. Because it comes to a hard...

Hello. I recently purchased a 1963 Chrysler Newport with a 361 and three speed manual. In two days it has gone from stuck to driving around my property. Ironically, I found another Chrysler Newport. This one is a 1964 with a manual as well. I know my ‘63 Newport has the HD 3 speed. But in 1964...

@SGT FURY I’m looking for a 1960 Fury. Preferably a convertible. Yeah, I know. I’d be receptive to a coupe or possibly a wagon. And I might even do a ‘61 as long as it’s a convertible. Know of any? Thx.

Let’s see the active members of this forum post their FL rig(s)!

Hopefully this is allowed. There are no sub forums within the FL forum. Looking for a 1960 Plymouth Fury. Strongly prefer black. The more original, the better. Not looking for a museum piece. Looking for one in this order: 2dr HT 2dr convertible 4dr wagon 4dr HT If you have one or know of one...

Very nice!

Any pics of your ‘60 Fury?

Sorry to hear that. This type of nonsense seems to be happening more and more. Roll Tide!

Looking for early closed chamber heads for my 1961 Sonoramic Commando 383. In lower Alabama. Prefer pickup 3-4 hours away. FL/LA/MS/GA. Thx.

Also- Option 356 per the book and on the data tag.

These are the only photos I have of that general area.