Dante64's latest activity
-
Pretty sure this can happen to any of them, regardless of the vintage. Ive seen it even in aftermarket and modified valve bodies. -
Dante64 replied to the thread Pulling in neutral.To address your last question. It’s a good one. There are no shops in driving distance that can handle this job correctly. I could have...
-
Having messed around with them just a little, I can tell you it doesn't surprise me if they need to be adjusted again. They can be...
-
That is exactly what I would do. If you find out the cause and could let us know here that would be hugely helpful. Good luck...
-
1968, unlike the earlier model in the picture, would be all metal rods and such. Still, adjustments to ensure the "shift comb" inside...
-
Dante64 replied to the thread Pulling in neutral.I’ll bring it back to the shop. I’m not messing with cables I have no idea about. Thanks for the quick reply.
-
Is the car in park when this happens? I agree that the first thing to check is the cables.
-
Following. Mine does the same when started in Neutral. Especially noticeable when the car is on jack stands and started in neutral.
-
Dante64 replied to the thread Pulling in neutral.As I just got it back from a $4k transmission job… I would like to assume all adjustments are correctly done. Yes, it’s in neutral/park.
-
Greeting Gents, Just had a complete rebuild on my 64 Newport transmission. Push button gear selector, 727 auto. Upon first start when...
-
-
Dante64 reacted to CBODY67's post in the thread Check your PCV valve, so easy and feeling stupid with .The valve should "be open" in both directions, BUT the "open" part is a drilled orifice for "minimum flow" under higher vacuum...
-
Dante64 replied to the thread Check your PCV valve, so easy and feeling stupid.I bought a 64 Newport two years ago. The poor thing was so “loaded-up” from a bad carb and poor (or lack of) a good tune up. Black...
-
Dante64 reacted to Zymurgy's post in the thread Check your PCV valve, so easy and feeling stupid with .I have never checked my PVC valve on Goldie. I don't know why but never have. I have done several things to her this year, each making...
