Recent content by Dart451

I did get B-body EFI tank installed on 72 Fury. the filler neck is not able to bolt up as it sits but is installed. I will look at that in a couple more days, right now cleaning up the final wiring. Car starts right up and got most of the factory gauges working. Once I test the cruise control...

Thanks for the measurements!

Can you measure from the top of the tank to the step down for the pump/sending unit?

Great info!! looking forward to the update

Currently the regulator is in the tank. You are correct it looks like my only option is going to be a return line from external regulator.

I need between 35-45 at idle. This is a bone stock 5.9 magnum out of a 95 truck. I using all the factory wiring and pcm to run it along with the OD trans. To test run had to use the truck fuel tank.

Thinking more about this option. Is the pressure regulator adjustable?

Thanks just got a 5.9 magnum installed in the fury and running on the factory EFI yesterday. Have the truck tank sitting in front of the car to make sure I wired it correctly.

Any updates on using a B-body tank??

Send me a price on them shipped to 61345

Need driver side door glass if it would fit a 72 fury. Be interested in passenger also if not scratched up as bad as mine. Thanks Jim