Recent content by frankiln

Thanks , but I found one in Ohio.

I was looking for a passenger door for a 2 door new Yorker 68 .iam in the Atlanta area .

Found more chewed wires .

Thanks all. Got dimmer working, now I need headlights , still trying to figure this out . One step at a time.

The yellow wires are hot , tan wire goes to fuse block instrument fuse, black and purple haven’t traced, when I jump yellow and tan, fuse becomes hot. All other fuses have power already.

Alright guys. I need your help again. I can’t get my power to my fuse panel instrument fuse . I researched and believe power goes through panel switch. I have power there on yellow wires , no power out on tan wire to fuse block. I bought new panel switch same result. I jumped yellow To tan and...

Thanks all for the help. It’s nice to know there’s help out there .

Thanks , I know I don’t have a wire going to proportioning valve . Now this makes sense.

This may be a dumb question, how does that wire get power then.

I have to double check this weekend, but I believe in the bulkhead slot w is the wiring hanging , and it says for brake warning lamp , yet my brake lights work .

I have a 68 newyorker . Thanks all for response . I have more figuring to do.

Have a question about wiring neutral safety switch. My wiring was chewed up by mice. Had a wire dangling from the bulkhead that I thought was the neutral safety switch but the diagram shows it coming from the starter relay directly. Just wondering how to wire this.

Iam tracing a wire and on the diagram it says wiper washer motor , where would that be located.

Wasn’t sure if that was ok , but that’s the way I’ll do it then. Thanks for the feedback.

Iam wiring my carb electric choke , I was going to wire it off the wiper motor. Which color wire do I run it off of.