Recent content by Fred A

To much travel. It stops good but close to floor

Hello, My 1978 Chrysler makes a hiss sound and brakes seem soft. Appears to be no leaks. Only thank left is master cylinder or booster. How do I know which one might be bad?

How much?

One side I replaced the hose and caliper. Does not release. When I install pads. You can turn. When I pumped the brakes to get the air out. The calipers are really tight can't turn rotor. You think I got a defective caliber? Should I tryva different brand?

How did you fix problem?

Are Raybestos calibers any good?

When I remove the caliper the rotor spins freely. You think it still can be the caliper? It is remanufactured by Cardon.

Anyone know what size the end fittings are for the driver side brake line?

I am going to try to replace a brake line and maybe get another caliper. Thanks for advise

No, opening the bleeder does not help.i disconnected the line at the master cylinder still not releasing. Think the new caliper is defective?

I replaced the hose . You think maybe the brake line?

Did you have the same problem before?

But shouldn't it release if loosen air bleed screw? What brand do you recommend?

Yes

Yes.