furynut65's latest activity

  • F
    furynut65 reacted to Ross Wooldridge's post in the thread Craig @ Mobileparts with
    Like
    Like
    .
    Craig is still out there, doing a good business, building his satisfied clients list. He has had some setbacks that were out of his...
  • F
    furynut65 reacted to Newport 66's post in the thread Craig @ Mobileparts with
    Like
    Like
    .
    Just a big shout out and thanks to Craig at Mobileparts!! He had the bushings I needed for the '62 300 and '62 Polara. Super friendly...
  • F
    furynut65 replied to the thread 4-speed firewall pics.
    Hey Fury Fan, Yes, that clutch rod hole is substantial. I was able to get the boot from Brewers, so I’ll just trace it out on the...
  • F
    furynut65 replied to the thread 4-speed firewall pics.
    Looks like the torque shaft runs basically parallel to the firewall. Also the hole for the clutch rod is rather large so location isn’t...
  • F
    furynut65 replied to the thread 4-speed firewall pics.
    Hey Fury Fan, Thank You so much for the great pics. I agree about locating everything with a mockup, but it sure helps seeing it all set...
  • F
    furynut65 replied to the thread 4-speed firewall pics.
    Thank You Sir!!
  • F
    furynut65 replied to the thread 4-speed firewall pics.
    Yes, I was sorta figuring that would be the best way to start. Sure every vehicle might be a little different. Was hoping to see exactly...
  • F
    furynut65 replied to the thread 4-speed firewall pics.
    Hey Fury Fan, Yes, still working on it. Would truly appreciate any kind of photos you could come up with. I know I’ll have to get it all...
  • F
    furynut65 reacted to garyh's post in the thread At the Drive In with
    Like
    Like
    .
    Drove the '66 Imp to my local (35 miles) Drive in Theater for their 75th Anniversary. Very Good Turnout ! I make it here a couple times...
Show older items
Back
Top