mr gtx's latest activity
-
mr gtx replied to the thread NOT MINE 1965 DODGE MONACO 2D HT - $10,900 Cape Coral Florida.1966 went with a shorter one because it was hard for the backseat passengers to get from one side to the other side. -
mr gtx replied to the thread Goldie will get her orginal heads reconditioned..Sorry I am not arguing just trying to learn by going back and forth and expressing my opinion and what worked for me over the years. I...
-
mr gtx replied to the thread Goldie will get her orginal heads reconditioned..there are no Dyno pulls to compare the only way to find out is for me to pull the heads off and put in 1.74 valves without doing...
-
mr gtx replied to the thread Goldie will get her orginal heads reconditioned..let's back up to post 1 and post 38. post 1 is going to keep the 516 heads I would say why not for what you're doing for a nice driver...
-
mr gtx replied to the thread Goldie will get her orginal heads reconditioned..look at my video on this forum. how a nice build street 440 in a c-body cruiser should perform. I kept the 1.6 in the 915 heads. smaller...
-
mr gtx replied to the thread Goldie will get her orginal heads reconditioned..never seen a 915 or 516 heads that were 73 cc unless a lot of milling. they were 79-80 cc. the 1.60 will not hurt anything other than...
-
mr gtx replied to the thread how a nice build street 440 in a c-body cruiser should perform.since this video i added a avs2 800 which helped off the line torque and then after a rpm performer intake helping power in the upper...
-
mr gtx replied to the thread Proper Vinyl Top Replacement Advice Needed - 1973 Newport Custom.mine came from topsonline for my newport. right top right price.
-
mr gtx replied to the thread NOT MINE 1970 Chrysler 300 TNT in Morgantown PA $19,901.the photos on ebay don't look washed out
-
If one of your orientation is for a forged crank and rods, the 440 has at least the crank already, STANDARD equipment. No need for...
-
mr gtx replied to the thread NOT MINE 1970 Chrysler 300 TNT in Morgantown PA $19,901.it's got the hp exhaust manifolds.
-
Cars with 26” radiators used a different core support with a larger opening. Why not just have a new 3 row, narrow fin 22” radiator core...
-
mr gtx replied to the thread Radiator upgrade.clutch fan for sure. ac cars came with 26 inch radiators so shouldn't be a problem
-
I have not been following this thread but in reading through the issues herein all I can say is that the original Holley 4160 carbs were...
-
mr gtx reacted to Ripinator's post in the thread Goldie will get her orginal heads reconditioned. with .While yer waiting for Dad, I thought I would show you the cam I used. I'm running it in a 440 with 516 heads. Also, while the spec...
