Recent content by turbinebronzebliss

It's a 2-door coupe.

For the speakers, I don't notice any backpressure or change in sound at any speed. With 250 watts RMS powering them, it would be difficult for my trained ears to tell if there are any frequency losses or amplitude changes at all. It's really remarkable actually. As for the package tray, I use...

No I left everything "infinite baffle" which worked out pretty amazingly well. Massive amounts of midbass at 60 hz and up. Better than most door installs.

Problem with cheap Bluetooth players is their output voltage on pre-out. I prefer to get about 2 volts minimum and 4 volts preferred into my amp or amps. That way I don't have to adjust my gain and cause Square wave or clipping to my speakers. High powered clean signal input is the beginning of...

I was hesitant to use a standard radio but my clients like cd and am/fm as well as Bluetooth. I do hidden Bluetooth receivers all the time!

Final panels in place!

I ran 4 ga from the battery to a distro block. Despite the big amplifiers, its really only about 1200 watts RMS so 4 ga is fine. I upgraded all grounds at the front. 4 ga from battery to chassis, battery to body/frame and engine to chassis. The biggest trick to prevent whine is to ground the...

Oh and the head unit is a Pioneer DEH7200BHS. It's a decent radio with CD and high voltage pre-outputs.

Thanks! The speakers are full depth and can go even bigger. It's a chasm! I have sound deadened it all as well which really helped with midbass response and rattle reduction.

It has been a while since I posted my audio progress so here goes! I started my journey with a single din am/fm cd player made by Pioneer. Why cd? my customers are usually cd kind of folks if you know what I mean. Lol. Next were my speakers. I deleted the kick panel vents and made new 6.5 inch...

One of the first things I did with my '67 Sport Fury was make my own package tray using wood, plastic, body filler and vinyl. I was able to do a funky design too.

I have installed an inexpensive alarm system made by Compustar in my '67 Sport Fury. I have installed hundreds of aftermarket doorlock actuators in older and classic cars over the years. I use Installbay door actuators and they cost about $5 each. Yes, they arr made in China and they will...

I would strongly suggest not using the Gorilla glue as a contact spray cement! I use one of the best product on the market called Weldwood by DAP. It's a convertible top contact cement and it is amazing. I use that for vinyl a lot. The 3M 77 spray and other aerosol contact cements DO NOT work on...

Thank you for the feedback! It does look a little out of place I agree. I am hesitant to change anything else in the interior but it is a work in progress so I may go a different direction with it. I may make some trunk panels in the same theme to showcase what I do and show off some of the...

Update. Better pictures and some carpet along the seat back to finish it off.