For Sale Parting out 1966 Plymouth Fury VIP 4 door

[jtalberts]

I have a complete 1966 Plymouth Fury 4 door with a 383. I am not sure about the rear. I will be taking off all the body work from the front of the car, but everything else is up for grabs. The only spot I have noticed with bad rust would be the rear driver side. I have 4 original dodge hubs and both rear skirts for it. The skirts are almost in near perfect condition. This has all the original badges that I can see. Let me know if there is anything you would want off of it and we can work something out. I am located in Wheeling, WV.


Here is a picture of the car. I can get more if you are interested.

 

[BJS racing]

I would be interested in the trim on the front fenders that goes around the headlight buckets. I would also be interested in the glove box button latch assy and the truck lock with the rod to the latch if you have a key for it.

 

[jtalberts]

I would be interested in the trim on the front fenders that goes around the headlight buckets. I would also be interested in the glove box button latch assy and the truck lock with the rod to the latch if you have a key for it.

I believe I am keeping the trim on the front fenders but if I don't I will let you know. I do have the trunk key and the lock does work. As far as the glove box latch, are you looking for the button mechanism that opens it?

 

[BJS racing]

Yes it is the same as the one for my console and am having a hell of a time finding one. The button assembly that I believe is held in by two screws.

 

[jtalberts]

Yes it is the same as the one for my console and am having a hell of a time finding one. The button assembly that I believe is held in by two screws.

I will take a look when I get home today. Where are you located?

 

[BJS racing]

Sachse Texas 75048.

 

[jtalberts]

Is this what you are looking for?

 

[BJS racing]

That should be it. From what I know they are the same for the glove box and the center console. That and the truck lock assy! Let me know. Thank you for checking on it for me! And actually the glove box liner in that pic looks to be in decent shape as well? There isn't one in my car. I would be interested in it as well. Even if I just use it as a template.

 

[Inspector71]

Doe it have a 3 spoke steering wheel?

 

[jtalberts]

Just a two spoke wheel

 

[tallhair]

Who was it that got hit in a parking lot and needed 66 or was it 65 Fury parts? Anyone?

 

[BJS racing]

It wasn't me but I am still looking for a couple of parts like listed earlier in this post.

 

[jtalberts]

I got them. I haven't forgot about you yet. Just trying to get the new car finished before the cold weather hits. I am going to get that car all ripped apart in the near future. Your parts are reserved.

 

[BJS racing]

Ok cool. Like I said I'm not working on mine yet so no big deal. It was just a friendly reminder! LOL. Looks like you are getting some headway over there.

 

[MagicManAmps]

Do you still have this car ? Looking for a passenger side vent window regulator if you have one.

 

[hotdog647]

I'm searching for C-pillar trim and some un-pitted tail lights/trim. Thanks.

 

[grimley]

hi, i am after a couple odd pieces.

drivers side chrome door trim and clips, power steering cap, LH rear interior armrest and base that the arm rest screws through (if theyre the same as 2 DR rear arm rests), i cant remember what else i need. clock if it works? (long shot!) if i remember/come across them ill let you know.

 

[butchr66]

Yeah that was prolly me. Just shot him a message.

 

[tuttled]

Does it have factory air conditioning?

 

[jtalberts]

Yes it does/did.