Search results

  1. G

    WANTED RB block water pump housing

    BB MOPAR/DODGE 350/361/383/426HEMI/426W/440 ALUMINUM WATER PUMP HOUSING | eBay That is a link to the one I bought on ebay.
  2. G

    Window Regulator Question

    I think that's it. I only see the big clip part, not the nub that extends from it, so I'm guessing the nub is what broke off. Thanks so much for your help! I thought it was going to be much more difficult than that. :)
  3. G

    WANTED RB block water pump housing

    Sorry mine was for a B not an RB....
  4. G

    WANTED RB block water pump housing

    I bought an aluminum one on Ebay a couple weeks ago for about $80. Ended up getting busy and haven't installed it yet, but it looked like a nice piece out of the box.
  5. G

    Window Regulator Question

    Hey Everyone, I have a 66 Polara 2 Door HardTop. The drivers side window broke off the regulator. From looking at the pieces in the door it looks like there is a plastic plug that connects the window to the regulator. That piece has lived it's full life as 54 year old plastic and gave up the...
  6. G

    WANTED 66 Polara 383 Rocker Arm Bolt Set

    Thanks again Bob, those will be perfect!
  7. G

    WANTED 66 Polara 383 Rocker Arm Bolt Set

    Due to mis-reading the torque settings for the rocker arms I broke one of my rocker arm bolts. There are 5 total, 3 short ones and 2 long ones. I have tried to find them online, but nobody seems to have one. I would like to buy a complete set of 5 off of someone if anyone has some available.
  8. G

    Fuel detonating in intake?

    My son has a 66 Polara with a 383. We don’t have a temp gauge hooked up, and my son is fixated upon the car overheating. He said the car overheated tonight, and that the fuel was detonating/burning in the intake and never making it into the cylinder. This sounds totally crazy to me, but he is...
  9. G

    1966 Polara 2DR Hardtop Project

    Alright, time for another update for everyone! Well last Saturday we went over to my friends house who is a welder and worked on the floorboards. Needless to say the car was a complete shit show. I was thinking there were a few holes in the floorpan, and there were, but in reality both sides...
  10. G

    Wheel Stud Question

    Hey Craig! Yep Crazyboutwagons was able to get me the new hub shipped out and it installed pretty easily :)
  11. G

    1966 Polara 2DR Hardtop Project

    Oh there will be pictures. He's actually getting about 6-7 other friends with "Cool Cars" and they are going cruising and stopping somewhere to take lots of pictures of all the cars. I think one kid even has a drone they are going to use. That being said, I plan on getting at least one with...
  12. G

    1966 Polara 2DR Hardtop Project

    Update on the project! We're in the final push to September 6th which is Birthday day! First off we sourced a new bench seat from @BiPolar. He was in the San Francisco area, and I'm in Nebraska so we had the challenge of how to get it shipped back here. I read about Greyhound Shipping, which...
  13. G

    Where can I find just Drums?

    @mobileparts is your guy. Craig is a great guy, give him a call! --- Craig --- 516 - 485 - 1935 ...... New York.....
  14. G

    Spedometer Gear Question

    Ok time for an update! :) I have the speedo out of the car and plan on taking it apart and lubing it up tomorrow. Personally the 27 tooth gear that is in the car currently is pretty close to the presumed correct 26 tooth gear. So I'm going to assume it's a speedo error and not a gearing...
  15. G

    Spedometer Gear Question

    235/70/15's are on the back. I assume it is the default rear ratio for the Polara but that is a wild card with a used vehicle.
  16. G

    Spedometer Gear Question

    How do we fix the spedometer head then?
  17. G

    Spedometer Gear Question

    Well we got the gear out, and it's not really a color, it's kind of a clear plastic. Counting the teeth yields 27. So if I were to go with less teeth by 35% would get me down to 21-22 teeth. I am having a hard time finding a gear smaller than 26 teeth online. All this makes me think the...
  18. G

    Spedometer Gear Question

    My logic on more teeth is that if we assume the cable spins 1 time for each tooth, and we assume it currently has 25 teeth, that means the cable is spinning 25 times per 1 rotation of the gear. Now, at 25 miles per hour on the speedometer, let's just say the cable is spinning 25 times. Well...
  19. G

    Spedometer Gear Question

    Thanks for all your help everyone! Looks like I know what the boy and I are doing when he get's home from school! :) I plan on removing the gear we have, comparing it to the chart 413 uploaded to determine the number of teeth we have currently. Then I'll order a new gear that has about 35%...
  20. G

    Spedometer Gear Question

    Do you have to drain all the transmission fluid in order to get the speedometer gear out? Sorry, stupid question from stupid person :)
Top