Search results for query: cams

Gotcha. In light of the relative dearth and expense of good lifters, I AM cleaning up and checking these old ones. I have plenty old ones, though I'll have to mind whether they're for early or later pushrod sizes.

I spoke with sales at Jegs today. It sounds like those Lunati cams really aren't available, regardlessof what the website shows. They don't know if they will be again, due to the Comp Cam merger. So if you got them consider yourself lucky. I'm going to try a Comp Cam Magnum 270. Fingers crossed.

Thanks Gerald - if I can get from one place in the middle of nowhere to another place in the middle of nowhere more quickly, that is just fine by me !!! I hope to be able to report back in a few months' time... look forward to checking out 318willrun too... Have a great day from Daniel

This is a Big Block Distributor Drive Gear For Flat Tappet Cams. It has a hardened tip shaft and pinned gears I bought it through D.C. many years ago. It is in good condition, but has been sitting on a shelf for many years, so it could use a cleanup. $50.00. (New ones #P3571071 are $106.00...

...disappointed that the nice parts wouldn't work well together, but I had to make a decision. I finally took the plunge and bought a set of COMP Cams Pro Magnum Shaft Mount Roller Rocker Arms (1621-16) and a set of Trick Flow Rocker Arm Shaft Studs, in combination with a set of COMP Cams...

Back in the day Lunati cams were more powerful and quieter% than the same duration comp and both were designed by UDHAROLD with lunati being later, Today Howards has the lastest UDHAROLD designes Lunati and Howard have easy to find cams for mopar .904 lifter and Comp used chevy grinds on their...

recurve dist will work noneed for morewith resonable compression BVVC on Whiplash style cams they try to make a hot rod sound at the expense of torque I make dynot tested suggestion later

Clevite is a good brand of bearing. That might mean that either the camshaft was not properly machined or there is a serious warping problem with the block. Before getting all excited about that, I would start by having the bearing surfaces of the cam checked with a micrometer. Some of the...

...cars with 14" wheels (I used them for my 57 Chrysler to get away from the two-wheel-cylinder per wheel on the front and 7/16" manual adjusting cams with good results). They'll even tell you what rotor and caliper to use if you want to buy them separately and just buy the conversion bracket...

...factory cam. Or something of that nature. Before Lunati became a part of the Edelbrock Group, they had a series of "updated factory cams", which included one for the Chrysler HP B/RB engines. A few members in here have that cam in late 1960s engines, with 10.0CR and like them. Installed...

Recently picked up a Black 1968 Chrysler 300 2 door. 350 HP 440, single exhaust, 2.76 rear gears. Semi verifiable 71k on the clock, mostly original, drove it at interstate speeds for about 4 hours after buying it. Looking to do some modifications to it to increase power and get it to spin the...

For 1978 wiper cams please see this post, 1978-New Wiper Cam Bushing

I agree with 70NEWYORKER, those spring attachments, at least on my 1959 Dodge and 1958 Plymouth, are moved in/out by the adjustment cams on each side to push/pull the brake shoes. I just finished rebuilding my brakes on the 1959 Dodge and had to turn the cams all the way inward to get the new...

I have received another batch of machined wiper cams. I am now able to supply them at 125$ Canadian including shipping to most countries in the world. 1978 c bodies with intermittent wipers only!

...adapt front brakes from a 63/64 Chrysler so you can get away from the multiple wheel cylinder front brakes of the 62 with its manual adjusting cams, etc. Also, a company called AAJ Brakes in the northwest makes a bolt on disc brake conversion that uses Cordoba and Monte Carlo parts if you...

Yes sir, I have been perusing parts, mostly cams and bearings but I have not bought any yet, still need the tools to install said parts once I have acquired them. Have acquired a Micrometer and a dial indicator in the recent weeks and have been practicing on how to use them, mostly the...

...the complete switch does interchange with a 65 so who knows..... My dad was an artist when it came to fixing things. He would fix these broken cams by reinforcing the broken part with stainless plates and would rivet them together. I have one that is still working 40 years after repair...

...with a 440 + Rubber Rugs + Cheap seats, & the front tag I'd say Cop Car! 1971 Plymouth Grand Fury Mopar 440 .30 boared over with aftermarket cams runs and drives asking $3500 obo post id: 7854600764 posted: 2025-05-31 13:01...

Imo toss the 413 stuff in the garbage. You'd be happier with the smaller of the 2 cheap summit cams

...I bought the cam and lifter kit with the pictures and they said not to use them and I have another set in the mail from them. Hopefully they look better. I also called comp cams and sent the pictures and they just remained neutral and said I should decide myself. pretty wishy washy support there