Search results for query: *

I will be doing all work. Small restorations, upholstery…. Some of my challenge will be that when my car is on the lift, it will block some of the light. With your flat ceiling it looks like you have one set centered in the middle and another 2 on the edges. My lift would be positioned closer...

Attached is my lighting study done by a RAB rep and light info. I targeted 70 foot candles in the precision areas and 55 foot candles in the general work areas and 100 foot candles in very high precision areas. I pretty much met those levels when I measured the light levels once the lights...

My 69 Road Runner RM23H9G are in alphabetic order

Welcome

Welcome

Welcome

My Hurst 300 are also out of alphabetic order

You need to decide what you want. Is this an area where you do precision work? If so, you should be targeting at minimum 70 foot candles at work height. If you go to a good LED manufacturer and give them your layout they will give you a plan that shows the foot candles in all areas. In my...

@3175375 How high are these hung and what kind of spacing did you use? My simple math says you used 2 rows about 12’ apart? Maybe this answers my question on spacing and height.

Hi from Chilton, Wisconsin, looks very complete, look under all seats for factory build sheet, example

Nos 63-73 imperial front grease seal. Part # 2808268. $10 plus shipping from 40165. Thanks

Adding to this thread to keep in one spot Thanks @3175375

I am adding on to my standalone garage which is 24x24. It’s where I keep my Polara, has a 4 post lift and my upholstery machine and workspace. It’s getting a little crowded and I have no room for another car so I decided to add on. In the process I am re-thinking my lighting. Currently I have 8...

Not sure if your Chrysler has them but I am looking for a set of rear bumper guards. Tim

This one looks right for a Jefferson Ave. plant Chrysler.

I've been reading body tags for over 40 years and don't recall ever seeing 4 option codes out of alphabetic order?? Anybody have any insight on this?

Thank you for finding this 2012 thread. The then-owner ( @bluemike2007 ) has not posted since 2012. Call me funny (paging @fury fan ), but I like the car (minus the hood scoops). The engine has been removed, so someone could drop a modern engine and call it a day.

I have a 100’ x 40’ shop that had 14 T5 fluorescent light fixtures (6 bulbs per fixture) and replaced them with 14 of these: Adiding LED High Bay Light, 200W 30,000LM (150LM/W) 1-10V Dimmable, 6.56’ Cable with 110V Plug, Hanging Hook,U-Shaped Bracket,Safe Rope, UL Listed - Amazon.com They are...

@cuda hunter @69CoronetRT @fc7_plumcrazy and I thank you for posting the tag AND the skirts of CS23T1C247619

Thank you -- CE23N0C270563