Search results for query: *

Yep.

Yea, I did those measurements a while back as part of a discussion/claim about LED headlights not drawing enough current to warrant the use of relays, that the stock 16ga 50+yearold wiring/components would be sufficient. If not clear by those numbers, strongly disagree.

Did you whip up that table yourself? Neat! Wonder how much aircraft landing lights draw...hehe

I REALLY like the desk idea! If only I could convince MRS SIPLOWGUY..... A friend of mine mounted a 1968 Fury I deck lid on the wall of his garage and used it as a desk. It is really cool!

Maybe if it doesn't sell I'll make a couch out of my 62 Imperial front clip. Or maybe a desk?

"Points ignition system changed over" I wonder if that means the lean burn distributor was converted. Would this car have had Lean Burn?

Here is the full ad, as the height of buildings in the background helps narrow it down.

More pics of the,wheel.

...garage kept many new parts and well kept. Points ignition system changed over, new battery recent brakes recent tune up new tires new radiator. **When I bought this car I was told it was running but backfiring through the carb, I was told it slipped time, I tore it apart and stopped when I...

New Game to start 2026. Happy New year. i willl try to get a few games in early. Recall, any way you can solve these is fine - No such thing as cheating. OP's only ask that if you get it before official reveal, feel free to indicate you "got it" but please let it run so others get a...

You can use an ohm meter to test the electrical side of the switches first. Ideally, you want to see zero ohms, but anything over 0.3 ohms and they need to be repaired. If the mode buttons on the selector switch are real stiff, it should come apart to be cleaned and lubed. There may be a...

Thanks big John for the link, and marty for the kind and exelent service, I spoke to @Mopar Marty and got the parts ordered, it was a pleasure to have met and speak with such a wealth if knowledge and a great person as well. Happy new year to all.

This ongoing discussion on FABO might be worth a read. Looking into doing my first paint job next year.

IMHO... If it's working, leave it alone. Any "new" reproduction stuff isn't going to be as good. NOS should be better in theory, but realistically NOS stuff is sometimes an expensive crap shoot. If the hoses are still pliable, they will probably last longer than new ones.

believe that's FURYGT

my local PPG dealer had formulas for my DD1 mist blue (68)...most body shop supply stores only carry one or 2 lines of paint so you may have to shop around...my Axalta dealer didn't have a formula for it but sometimes its a case of "somebody tore that page out of the old book"...there are places...

Hella E-code (left) pattern comparison to Holley Retrobright (right)-lowbeam-4 lamp system highbeams Current draw comparison to the Retrobrights

Hi thanks for all your help! Will defo consider all this thanks! Fuel pump and pushrod are both new yes! Thanks

Compression readings are relative to the elevation altitude of the vehicle when the test is done. Most of the specs usually indicate "At or near sea level". As long as the readings are within about 20psi, all is good. When I was "worried" about cylinder wear on our '66 Newport 383 2bbl, I...

Finally got the dash halfway disassembled in my 1965, and found the severed vacuum line that fed to the control block and kept everything from working. While I am in there, I am going to buy a vacuum gun (any suggestions on which one?) and test operation of all the plenum door vacuum actuators...