Search results for query: HOSE!

  • Order by relevance
  1. Big_John

    76 NYB stalls

    Fuel pump pushrod or fuel pump is my bet, but it also could be ignition related. Bad coil or bad pickup in the distributor can do that. Possibly ECU box too. Check the fuel by disconnecting the fuel line at the carb and sticking a piece of hose on the end. Also disconnect the coil wire so...
  2. 4

    Interested in your thoughts on one low compression cylinder

    Have you changed the oil since you had it? How long did istay clean? Is the choke adjust right, or does it blow black smoke when cold? Try this, spray a small amount of atomized water spray from a hose nozzle down the carb with it hot and running 1200 rpm. Do it 5 times about 4 seconds at a...
  3. 1970FuryConv

    Edelbrock 1906 jetting

    I would replace the fuel filter, 1st. If it's gurgling that could indicate a problem. NAPA 3032 is 5/16 line and good quality. It has an arrow on the side because it is one-way. I would then disconnect the fuel hose at the carb. Hold the fuel hose in a jar. Have an assistant turn the ignition...
  4. 1970FuryConv

    '67 Fury rear rubber brake hose questions?? Longer post -sorry.

    Hi John What rear brake hose brand and part# did you use? Thanks, Ben
  5. C

    Bake booster to Vacuum canister hose size.

    Hoses are measured by the ID rather than OD. ID is what's stamped on them.
  6. darth_linux

    '66 Newport 2 Door hardtop

    Well, I got most of the new AC lines mocked up (not crimped yet) but I was shorted two fittings for the hose going from the compressor to the condenser, so that's not ready yet. Anyway, it was about $200 for the hoses and fittings and $100 for the crimping tool. Almost there! All of these...
  7. H

    Coolant Leak/Engine issues

    Hello, I have a 1967 Plymouth Fury III 383 V8 Commando with A/C. I’m working on fixing a coolant leak from the lower radiator hose when I noticed there was coolant dripping from the third belt closest to the oil pan. Its dripping from the belt and the circular thing (I’m not sure what it is-...
  8. 6

    A/C Heater component

    If you look in the picture you can see one of the vacuum tubes that is disconnected. it also looks like my plastic hose coming through the firewall is broken on the end. like it should be attached to something.
  9. Gerald Morris

    65 Fury stock brakes pull to the right

    THANK YOU for raising that point! Swollen hoses devil many drivers long before they're discovered. The REAR hose often causes the most damage, as people neglect to change it when they change the front pair. If ONE hose has swollen near shut, its a good idea to change all 3, especially if one...
  10. The_Eagles’_Nest

    The Road to Carlisle

    Oil, power steering fluid and gear lube has been ordered, also more parts from Vans Auto. The heater hose nipples will need some persuasion to leave their home for the past 50 years.
  11. lemondana

    Bake booster to Vacuum canister hose size.

    I think I have a box of the bigger vacuum hose, let me check tomorrow. I'll just send you a piece, because I know I haven't ever used any of it. I got it a long time ago. And it is the heavy wall hose.
  12. D

    Help to Identify hose out of firewall

    I'm working on a buddies 1968 Imperial and as is with most old cars its a bit of exploration and guess work as not everything is the way the factory did it. There is a rubber hose that exits the firewall by the brake booster and then is just tied up in the harness and not connected to anything...
  13. 1970FuryConv

    Rear Brake Hose

    Hi Josh, What part number did NAPA hose have? Thanks! Ben
  14. fury fan

    NOT MINE 67 Sport Fury fasttop, 440 4-speed, gold-black, 53k miles, $18,000 Michigan

    Better get this brake hose replaced pronto. Cracks/splits in the outer sheath let debris in, and as the hose flexes, it can abrade the inner material - which holds the pressure. Would be prudent to replace all 3, although cracking the fluid system can often snowball if bleeders/tube nuts don't...
  15. L

    Where to buy water pump housing attachments for 73 400 engine?

    Thank you! This explains everything I needed!
  16. 3175375

    Time for the Heater Box Rebuild

    Did you get the fresh air intake hose that you were looking for?
  17. Knebel

    Electric fuel Pump placement

    Its further than 12 inches, i also installed a one way check valve so it keeps fuel primes in the hose "drain back" out the hose into the tank. Im not sure if that works as intended as the pump sometimes still clicks VERY loud, i think the checkvalve might stick every now and then... I run a...
  18. Big_John

    Thermal expansion valve with sanden style compressor

    It's attached with a clip.
  19. WissaMan

    '77 AutoTemp II to Manual conversion

    Next were the vacuum lines. All you need to do is follow the routing for the manual AC controls in the service manual. The vacuum servos are all the same. I bought new vacuum lines as I didn't want to hack up the vacuum hose harness. I wanted to keep everything as intact as possible. Not...
Back
Top